6V3230 BOLT Caterpillar parts
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, TH55-E70
Rating:
Alternative (cross code) number:
CA6V3230
6V-3230
6V3230
CA6V3230
6V-3230
6V3230
Weight: 1 pounds 0 kg.
Information:
GRIP LENGTH
292.1
mm
HEAD HEIGHT
14.66
mm
HEX SIZE
28.58
mm
LENGTH
342.9
mm
MATERIAL
Steel 1170 MPa PSI Min Tensile Strength
THREAD SIZE
.75-10
PETROLEUM TRANSMISSION, TRUCK,
Compatible equipment models: 6V3230:
Number on catalog scheme:
9
For full view, you need register
Information:
All 1100, 3100, 3200, 3300 And 3400 Series Engine Cylinder HeadsThe 6V9050 Cylinder Head Exhaust Stud Fixture Group, when bolted to the cylinder head, accurately locates the center of the broken stud. This allows the stud to be drilled out without damaging the threaded hole in the cylinder head.Components Of The 6V9050 Exhaust Stud Removal Group
1. 6V3073 Carrying Case2. 6V4094 Liner3. 5P7330 Lock Screw4. 6V7847 Fixture5. 6V9051 Block6. 6V9046 Bushing [for 7.938 mmØ (.312"Ø) drill]7. 6V9047 Bushing [for 3.175 mmØ (.125"Ø) drill]8. 6V9045 Bushing [for 9.5 mmØ (.375"Ø) bolt]9. 0S1571 Bolt10. 6V9049 Drill [3.175 mmØ (.125"Ø)]11. 6V9048 Drill [7.938 mmØ (.312"Ø)]12. 5P6732 ScrewInstallation And Use Of 6V9050 Exhaust Stud Removal Group
1 If broken stud (1) is more than 3.2 mm (.125") above the gasket surface, grind the end of stud (1) flat so it is less than this dimension. Be careful not to grind the surface of the cylinder head.2 Fasten 6V7847 Fixture (2) to the cylinder head using two 6V9045 Bushings (3) and two 0S1571 Bolts (4). 3 Put 6V9047 Bushing (5) in fixture (2). Use a 9.5 mm (.375") capacity drill and 6V9049 Drill (6) to drill through the broken stud.
Do not drill into the cylinder head. While drilling, periodically pull out the drill to remove chips and lubricate drill (6).
4 Remove bushing (5) and chips from the hole. Put 6V9046 Bushing (7) in fixture (2). Use 12.7 mm (.50") capacity drill and 6V9048 Drill (8) to drill out the remainder of the broken stud.
Do not drill into the cylinder head. While drilling periodically pull out the drill to remove chip and lubricate drill (8).
5 Remove the fixture from the cylinder head. Remove the tip of the stud from the cylinder head using 5P6732 Screw (9).6 Use a 3/8-16 tap (10) to remove any remaining stud threads from the hole. Do not make threads past the depth of the original threads. Clean the threaded hole. Inspect the threads for damage. If damaged, helicoils may be installed in the heads of 1100, 3100 and 3200 Series engines; on 3300 and 3400 Series engines, the cylinder head should be replaced with a new or exchange cylinder head.
1. 6V3073 Carrying Case2. 6V4094 Liner3. 5P7330 Lock Screw4. 6V7847 Fixture5. 6V9051 Block6. 6V9046 Bushing [for 7.938 mmØ (.312"Ø) drill]7. 6V9047 Bushing [for 3.175 mmØ (.125"Ø) drill]8. 6V9045 Bushing [for 9.5 mmØ (.375"Ø) bolt]9. 0S1571 Bolt10. 6V9049 Drill [3.175 mmØ (.125"Ø)]11. 6V9048 Drill [7.938 mmØ (.312"Ø)]12. 5P6732 ScrewInstallation And Use Of 6V9050 Exhaust Stud Removal Group
1 If broken stud (1) is more than 3.2 mm (.125") above the gasket surface, grind the end of stud (1) flat so it is less than this dimension. Be careful not to grind the surface of the cylinder head.2 Fasten 6V7847 Fixture (2) to the cylinder head using two 6V9045 Bushings (3) and two 0S1571 Bolts (4). 3 Put 6V9047 Bushing (5) in fixture (2). Use a 9.5 mm (.375") capacity drill and 6V9049 Drill (6) to drill through the broken stud.
Do not drill into the cylinder head. While drilling, periodically pull out the drill to remove chips and lubricate drill (6).
4 Remove bushing (5) and chips from the hole. Put 6V9046 Bushing (7) in fixture (2). Use 12.7 mm (.50") capacity drill and 6V9048 Drill (8) to drill out the remainder of the broken stud.
Do not drill into the cylinder head. While drilling periodically pull out the drill to remove chip and lubricate drill (8).
5 Remove the fixture from the cylinder head. Remove the tip of the stud from the cylinder head using 5P6732 Screw (9).6 Use a 3/8-16 tap (10) to remove any remaining stud threads from the hole. Do not make threads past the depth of the original threads. Clean the threaded hole. Inspect the threads for damage. If damaged, helicoils may be installed in the heads of 1100, 3100 and 3200 Series engines; on 3300 and 3400 Series engines, the cylinder head should be replaced with a new or exchange cylinder head.
Cat SIS web machinery list:
Parts bolt Caterpillar catalog:
615C, 623G, 784C, 785C, 785D, 789B, 789C, 988B
793B, 793C, 793D, 938H, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II, 966H, 972G, 972G II, 972H, IT38H, IT62G II, IT62H
16M, 657E, 657G, 777F, 777G, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
14M, 320 L, 321B, 517, 525D, 535D, 545D, 555D, 730, 730C, 793C, 938H, D400E II, IT38H, SE60 V XW
140G, 773G, 773G OEM, 775G, 775G OEM, 784C, 785C, 785D, 789C, 789D, 793C, 793D, 994H, D11R, D11T, R1700 II, R1700G, R2900, R2900G, R3000H, TS180, TS185, TS220, TS225
641B, 651, 651B, 657B, 666, 768C, 784B, 785, 785B, 789B, 793, 793B, 793C, 966D
120G, 657, 769C, 769D, 771C, 771D, 772, 773B, 773D, 775B, 775D, 776C, 776D, 777, 777D, 784B, 785B, 789B, 793B, 793C, 920, 930, 950, 966C, 966D
120M, 120M 2, 12H NA, 12M, 12M 2, 12M 3, 12M 3 AWD, 140H NA, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 160H NA, 160M, 160M 2, 160M 3, 160M 3 AWD, 163H NA, 651, 784B, 784C, 785, 785B, 785C, 785D, 789, 78...
1390, 2390, 2590, 390F L, 521, 521B, 522B, 541, 541 2, 551, 552, 552 2, 777F, 777G, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 834G, 834H, 834K, 986H, 988G, 988H, 988K
730, 730C, 740, 740B, 793, 793B, 793C, 793D, 988G, 988H, D400E II, D8R, D8T, M320
120M, 12M, 14M, 16M, 345B II, 345C, 345C L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 5080, 5090B, 5110B, 525B, 525C, 53...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14G, 14H, 14H NA, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16G, 16H, 16H NA, 16M, 24H, 24M, 785B, 785C, 789B, 789C, 793B, 79...
120K, 120K 2, 12K, 140K, 140K 2, 160K, 324D FM LL, 325D FM, 325D FM LL, 5110B, 621K, 623K, 623K LRC, 627H, 627K, 627K LRC, 773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G LRC, 775G OEM, 777F, 777G, 9...
3019551
BOLT
CX35
CX35
904B, 904H, 910E, CX31, IT12B, IT14B, IT14F
12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD, CX31, CX31-C9I, CX35, R1600H
730C, 797, 797B, 797F, 950 GC, 950H, 962H, 966H, 966M, 966M XE, 972H, 972M, 972M XE, 980M, 982M, 986H, CB-434D, CB-44B, CB-534D, CB-54, CB-54B, CB-564D, CB-634D, CB-64, CD-54, CX31, CX31-C13I, CX31-C1...
14M, 16M, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 986H, 988G, 9...
611, 615C, 826C, 834B, 836, 936, 936F, 950G, 988B, 992C, 992D, D10R, D5H, D6R, D6R II, D8L, TH48-E70
330C FM, 834G, 834H, 988G, 988H, AD45B, AD55, AD55B, AD60, C7, IT18F
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 135H, 135H NA, 140K, 140K 2, 160K, 793F, 793F CMD, 793F OEM, 793F-XQ, C7
24H, 24M, 834B, 834G, 834H, 836, 836G, 836H, 966D, 966F, 966F II, 970F, 980C, 980F, 988B, 988F, 988F II, 988G, 988H, CX28, D350E, D350E II, D400, D400E, D40D, R1700 II, R2900
0321853
BOLT-12 POINT HEAD
227, 235C, 235D, 245B, 245D, 515, 525, CX48-P2300, D8N, D8R, D8R II
227, 235C, 235D, 245B, 245D, 515, 525, CX48-P2300, D8N, D8R, D8R II
215, 215B, 215C, 215D, 219D, 235B, 235C, 235D, 245B, 515, 525, 955H, 973D, 977H, CB-434, CB-544, CB-545, D6T, D7E, D7E LGP, D7R, D7R II, D8R, D8R II, D8T, TH55-E70