7C6671 BOLT AS Caterpillar parts
120H, 120H NA, 135H, 135H NA, 214B, 3114, 3116, 3126, 3176, 3176B, 320 L, 320B, 322 FM L, 322 LN, 325, 325 L, 325 LN, 325B, 325B L, 446, 446B, 446D, 45, 561M, 613C II, 918F, 924F, 928G, 938F, 950F, 95...
Rating:
Alternative (cross code) number:
CA7C6671
7C-6671
7C6671
CA7C6671
7C-6671
7C6671
Weight: 0.03 pounds 0 kg.
ARTICULATED TRUCK, WHEELED EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$7.76
27 Jan 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
CATERPILLAR BOLT A 7C6671 NEW
$9.00
14 Sep 2019
11 Hundredths Pounds
CTP: CTP
CTP Caterpillar 7c-6671 Additional Comp1nts and Gaskets (7c6671) Aftermarket
Number on catalog scheme:
7
For full view, you need register
Compatible equipment models: 7C6671:
Information:
Removal Procedure
Start By:
Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Remove the lifters. Refer to Disassembly and Assembly, "Lifter Group - Remove and Install".
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The joint between the connecting rod and the connecting rod cap is produced by fracturing. The connecting rod assembly must be handled with care in order to avoid damage to the mating surfaces. The connecting rod assembly must be replaced if any damage occurs to the mating surfaces. New connecting rod assemblies come with the connecting rod caps bolted on the connecting rod.Use only a soft jawed vise to hold the connecting rod assembly when removing the connecting rod cap bolts. Use only a soft faced hammer to tap the connecting rod cap when separating the connecting rod cap from the connecting rod.Failure to use a soft jawed vise and a soft faced hammer may result in damage to the connecting rod assembly.
Illustration 1 g00699985
Remove bolt (1) from the cylinder block.
Remove bolt (3) from the main bearing cap.
Remove oil suction tube (2) from the cylinder block.
Illustration 2 g00778087
Note: Etch the cylinder number on each connecting rod and connecting rod cap before you remove the connecting rod and the piston from the cylinder block. The cylinder number should be etched on the same side of the connecting rod as the tab for the connecting rod bearings. The cylinder numbers will help locate the piston and connecting rod assemblies during assembly.
Remove bolts (4) that fasten the connecting rod bearing caps to the connecting rods. Note: Do Not reuse bolts (4). Use new bolts in order to secure the connecting rod cap for reassembly.
Remove connecting rod bearing cap (5) from the connecting rod.
Push the piston out of the top of the cylinder block.Note: Ensure that the following components are kept in the correct order for installation: pistons, connecting rods, connecting rod bearing caps and connecting rod bearings.
Start By:
Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Remove the lifters. Refer to Disassembly and Assembly, "Lifter Group - Remove and Install".
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The joint between the connecting rod and the connecting rod cap is produced by fracturing. The connecting rod assembly must be handled with care in order to avoid damage to the mating surfaces. The connecting rod assembly must be replaced if any damage occurs to the mating surfaces. New connecting rod assemblies come with the connecting rod caps bolted on the connecting rod.Use only a soft jawed vise to hold the connecting rod assembly when removing the connecting rod cap bolts. Use only a soft faced hammer to tap the connecting rod cap when separating the connecting rod cap from the connecting rod.Failure to use a soft jawed vise and a soft faced hammer may result in damage to the connecting rod assembly.
Illustration 1 g00699985
Remove bolt (1) from the cylinder block.
Remove bolt (3) from the main bearing cap.
Remove oil suction tube (2) from the cylinder block.
Illustration 2 g00778087
Note: Etch the cylinder number on each connecting rod and connecting rod cap before you remove the connecting rod and the piston from the cylinder block. The cylinder number should be etched on the same side of the connecting rod as the tab for the connecting rod bearings. The cylinder numbers will help locate the piston and connecting rod assemblies during assembly.
Remove bolts (4) that fasten the connecting rod bearing caps to the connecting rods. Note: Do Not reuse bolts (4). Use new bolts in order to secure the connecting rod cap for reassembly.
Remove connecting rod bearing cap (5) from the connecting rod.
Push the piston out of the top of the cylinder block.Note: Ensure that the following components are kept in the correct order for installation: pistons, connecting rods, connecting rod bearing caps and connecting rod bearings.
Cat SIS web machinery list:
Parts bolt Caterpillar catalog:
320C FM, 322B L, 322C, 322C FM, 325B L, 325C, 325C FM, 330B L, 330C FM, 330C L, 330C MH, 345B, 345B II, 345B II MH, 5110B, BA18, D25C, D30C, D350C, M325B, W330B, W345B II
120H, 12G, 130G, 135H, 135H NA, 140G, 160G, 825C, 826C, D10, PS-300B
322B L, 322B LN, 322C, 322C FM, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 539, CB-535B, M325B, M325C MH
AP-1055D, AP-650B, AP-655D, BG-225C, BG-245C, BG655D, PR-450
AP-1055D, AP-650B, AP-655D, BG-225C, BG-245C, BG655D, PR-450
CP-56, CP-573E, CP-64, CP-663E, CP-76, CS-531D, CS-533D, CS-533E, CS-54, CS-563D, CS-563E, CS-573D, CS-583D, CS-583E, CS-64, CS-663E, CS-683E, CS-74
320B FM LL, 322B L, 325B L, 325C, 330B L, 330D MH, 345B II, 345C, 345C L, 345C MH, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 3...
2384C, 2484C, 322 FM L, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 324D L, 330, 330 FM L, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D MH, 336D L, 336E L, 345B, 345B II, 345B I...
320B, 320C, 320D, 320D FM, 320D L, 320D2, 320D2 L, 320E, 320E LN, 321C, 322C, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D FM, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, ...
120, 120B, 120G, 120H, 120H ES, 120H NA, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140, 140G, 140H, 140H ES, 140H NA, 143H, 14E, 322B
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140G, 140H, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H, 14M, 160H, 160K, 160M,...
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3114, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B L, 35, 365B, 365B II, 365C, 365C L, 365C L MH, 374F L, 385B, 385C, 385C L, 385C L...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140G, 140H, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H, 14M, 160H, 160K, 160M,...
1090, 1190, 1190T, 120G, 120H ES, 120H NA, 120M, 1290T, 12G, 12M, 130G, 135H NA, 140G, 160G, 16G, 216, 216B, 216B3, 226B, 226B3, 228, 2290, 232B, 236, 236B, 236B3, 2384C, 2390, 2391, 242B, 242B3, 246C...
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 213B, 214B, 30/30, 3116, 3126, 3126B, 3126E, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, ...
120H, 120H ES, 120H NA, 135H, 135H NA, 206B, 213B, 214B, 3114, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 330B L, 345B II, 345B L, 345C L, 35, 350, 350 L, 365B, 365B II, 365C...
120H, 120H ES, 120H NA, 135H, 135H NA, 206B, 211B, 213B, 214B, 3114, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, ...
10-20B, 120H, 12H, 12H NA, 135H, 140H, 140H NA, 140M, 140M 2, 143H, 14M, 160H, 160M, 160M 2, 163H, 236D, 242D, 246C, 246D, 2470C, 24H, 256C, 2570C, 257D, 259D, 262C, 262C2, 262D, 2670C, 272C, 272D, 27...
214B, 216, 216B, 216B3, 226B, 226B3, 228, 231D, 232B, 235, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 245, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 2...
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12K, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140K, 140K 2, 140M 2, 140M 3, 140M 3 AWD, 143H, 160H, 160K, 160M 2, 160M 3, 160M 3 AWD, 163H, 205B, 211B, ...
120H, 120H ES, 120H NA, 12H, 135H, 135H NA, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 3176, 3176B, 320 L, 320B, 322 FM L, 322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, ...