AVSPARE.COM
parts catalog

BOLT (M14X90) 7X0819 - Caterpillar


7X0819 BOLT (M14X90) Caterpillar parts 212B
Rating:
81
Alternative (cross code) number:
CA7X0819
7X-0819
7X0819
Caterpillar 7X0819 BOLT (M14X90)
Weight: 0.25 pounds 0 kg.
Information:
COATING/PLATING  Dacromet 320 Plus L Coating 
DR TYPE  HEX 
GRIP LENGTH  50  mm
HEAD DIAMETER  21  mm
HEAD HEIGHT  14  mm
HEAD STYLE  SHD 
LENGTH  90  mm
MATERIAL  Steel RC 35 Min 
SOCKET SIZE  12  mm
THREAD SIZE  M14X2 

Buy BOLT (M14X90) 7X0819 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 7X0819:

EXCAVATOR  212B   Caterpillar
Number on catalog scheme: 42
  For full view, you need register

Information:


Never run the engine without an air cleaner element installed. Never run the engine with a damaged air cleaner element. Do not use air cleaner elements with damaged pleats, gaskets or seals. Dirt entering the engine causes premature wear and damage to engine components. Air cleaner elements help to prevent airborne debris from entering the air inlet.
Never service the air cleaner element with the engine running since this will allow dirt to enter the engine.
Servicing the Air Cleaner Elements
If the air cleaner element becomes plugged, the air can split the material of the air cleaner element. Unfiltered air will drastically accelerate internal engine wear. Your Caterpillar dealer has the proper air cleaner elements for your application. Consult your Caterpillar dealer for the correct air cleaner element.
Check the precleaner (if equipped) daily for accumulation of dirt and debris. Remove any dirt and debris, as needed.
Operating conditions (dust, dirt, and debris) may require more frequent service of the air cleaner element.
The air cleaner element may be cleaned up to six times if the element has been properly cleaned and inspected.
The air cleaner element should be replaced at least one time per year. This replacement should be performed regardless of the number of cleanings.Replace the dirty paper air cleaner elements with clean air cleaner elements. Before installation, check the air cleaner elements thoroughly for tears and/or holes in the filter material. Inspect the gasket or the seal of the air cleaner element for damage. Maintain a supply of suitable air cleaner elements for replacement purposes.Dual Element Air Cleaners
The dual element air cleaner contains a primary air cleaner element and a secondary air cleaner element. The primary air cleaner element can be used up to six times if the element has been properly cleaned and inspected. The primary air cleaner element should be replaced at least one time per year. This replacement should be performed regardless of the number of cleanings.The secondary air cleaner element is not serviceable or washable. The secondary air cleaner element should be removed and discarded for every three cleanings of the primary air cleaner element. When the engine is operating in environments that are dusty or dirty, air cleaner elements may require more frequent replacement.
Illustration 1 g03749040
(1) Cover
(2) Primary air cleaner element
(3) Secondary air cleaner element
Remove the cover. Remove the primary air cleaner element.
The secondary air cleaner element should be removed and discarded for every three cleanings of the primary air cleaner element. Note: Refer to "Cleaning the Primary Air Cleaner Elements".
Cover the air inlet to the turbocharger with tape in order to keep out dirt.
Clean the inside of the air cleaner cover and body with a clean, dry cloth.
Remove the tape from the air inlet of the turbocharger. Install the secondary air cleaner element. Install a primary air cleaner element that is new or cleaned.
Install the air cleaner cover.
Reset the air cleaner service indicator. Cleaning the Primary Air Cleaner Elements
Caterpillar does not recommend the cleaning of air filter elements, since there is not a relatively feasible and

Caterpillar parts catalog:

Caterpillar parts catalog
120 AWD Motor Grader Y9D00001-UP (MACHINE) POWERED BY C7.1 Engine
120 AWD Motor Grader Y9B00001-UP (MACHINE) POWERED BY C7.1 Engine
120 AWD Motor Grader E9300001-UP (MACHINE) POWERED BY C7.1 Engine
120 AWD Motor Grader E9500001-UP (MACHINE) POWERED BY C7.1 Engine
212B EXCAVATOR WHEEL TYPE 3PJ00001-UP (MACHINE)
910M Compact Wheel Loader H2200001-UP (MACHINE) POWERED BY C4.4 Engine
910K Compact Wheel Loader L2200001-UP (MACHINE) POWERED BY C4.4 Engine
914M Compact Wheel Loader H2400001-UP (MACHINE) POWERED BY C4.4 Engine
914K Compact Wheel Loader L2400001-UP (MACHINE) POWERED BY C4.4 Engine
918M Compact Wheel Loader H2600001-UP (MACHINE) POWERED BY C4.4 Engine
920K Compact Wheel Loader B9800001-UP (MACHINE) POWERED BY C4.4B Engine
914K Compact Wheel Loader BF400001-UP (MACHINE) POWERED BY C4.4B Engine


Parts bolt Caterpillar catalog:

5W1310 BOLT
205, 206, 212, 213B
8U5332 BOLT
206B, 212B, 213B, 224B
8U7815 BOLT
206B, 212B, 213B, 224B
8U6235 BOLT
206, 206B, 212, 212B, 213B, 224B
5W5015 BOLT
206, 206B, 212, 212B
5W1257 BOLT
206, 206B, 212, 212B
8U5699 BOLT
206, 206B, 212, 212B
5W5626 BOLT
206, 206B, 212, 212B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.