7X0870 BOLT Caterpillar parts
14M, 16M, 3116, 3176, 3176B, 3176C, 3196, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 420D, 515, 525, 525B, 525C, 535B, 535C, 545, 545C, ...
Rating:
Alternative (cross code) number:
CA7X0870
7X-0870
7X0870
CA7X0870
7X-0870
7X0870
Weight: 0.20 pounds 0 kg.
Information:
COATING/PLATING
Phosphate and Oil Coating
GRIP LENGTH
112
mm
HEAD HEIGHT
5.5
mm
HEX SIZE
13
mm
LENGTH
140
mm
MATERIAL
Steel - 1040 MPa Min Tensile Strength
THREAD SIZE
M8X1.25
ARTICULATED TRUCK, WHEELED EXCAVATOR,
Compatible equipment models: 7X0870:
Number on catalog scheme:
14
For full view, you need register
Information:
Note: Adjust the frequency of cleaning according to the effects of the operating environment.Inspect the radiator for these items: damaged fins, corrosion, dirt, grease, insects, leaves, oil and other debris. Clean the radiator, if necessary.
Personal injury can result from air pressure.Personal injury can result without following proper procedure. When using pressure air, wear a protective face shield and protective clothing.The maximum air pressure for cleaning purposes must be reduced to 205 kPa (30 psi) when the air nozzle is deadheaded.
Pressurized air is the preferred method for removing loose debris. Direct the air in the opposite direction of the air flow. Hold the nozzle approximately 6 mm (0.25 inch) away from the fins. Slowly move the air nozzle in a direction that is parallel with the tubes. This movement will remove debris that is between the tubes.Pressurized water may also be used for cleaning. The maximum water pressure for cleaning purposes must be less than 275 kPa (40 psi). Use pressurized water in order to soften mud. Clean the core from both sides.Use a degreaser and steam for removal of oil and grease. Clean both sides of the core. Wash the core with detergent and hot water. Thoroughly rinse the core with clean water.After cleaning, start the engine and accelerate the engine to high idle rpm. This procedure will help in the removal of debris and drying of the core. Stop the engine. Use a light bulb behind the core in order to inspect the core for cleanliness. Repeat the cleaning, if necessary.Inspect the fins for damage. Bent fins may be opened with a “comb”. Inspect these items for good condition: welds, mounting brackets, air lines, connections, clamps and seals. Make repairs, if necessary.
Personal injury can result from air pressure.Personal injury can result without following proper procedure. When using pressure air, wear a protective face shield and protective clothing.The maximum air pressure for cleaning purposes must be reduced to 205 kPa (30 psi) when the air nozzle is deadheaded.
Pressurized air is the preferred method for removing loose debris. Direct the air in the opposite direction of the air flow. Hold the nozzle approximately 6 mm (0.25 inch) away from the fins. Slowly move the air nozzle in a direction that is parallel with the tubes. This movement will remove debris that is between the tubes.Pressurized water may also be used for cleaning. The maximum water pressure for cleaning purposes must be less than 275 kPa (40 psi). Use pressurized water in order to soften mud. Clean the core from both sides.Use a degreaser and steam for removal of oil and grease. Clean both sides of the core. Wash the core with detergent and hot water. Thoroughly rinse the core with clean water.After cleaning, start the engine and accelerate the engine to high idle rpm. This procedure will help in the removal of debris and drying of the core. Stop the engine. Use a light bulb behind the core in order to inspect the core for cleanliness. Repeat the cleaning, if necessary.Inspect the fins for damage. Bent fins may be opened with a “comb”. Inspect these items for good condition: welds, mounting brackets, air lines, connections, clamps and seals. Make repairs, if necessary.
Cat SIS web machinery list:
Parts bolt Caterpillar catalog:
320C FM, 320D, 320D FM, 320D FM RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329D L, 329E, 329E L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 345D L, 349...
324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325D, 325D L, 326D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 3...
320B, 320C, 320D, 320D FM, 320D L, 320D2, 320D2 L, 320E, 320E LN, 321C, 322C, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D FM, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, ...
325C, 330, 330 FM L, 330B L, 330C L, 330D, 330D L, 336D L, 345B, 345C, 345C L, 345D, 349D L, 350, 350 L, OEMS, TK1051
16M, 320D, 320D FM, 320D L, 320D2, 320D2 L, 320E, 320E LN, 322C, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 325C, 325D, 325D FM, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330C, 3...
320C, 325C, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 34...
1090, 2290, 320D, 320D FM, 322C FM, 324D FM, 324D FM LL, 325C, 325D, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 336E, 345C, 511, OEMS, TK711
330B L, 330C, 330C FM, 330C L, 330D FM, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 551, 552, OEMS, TK751, TK752
330, 330 FM L, 330 L, 330B, 330B L, 345B II, 345B II MH, 345B L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 350, 365B, 365B II, 365B L, 385B, 525C, 525D, 535C, 535D, 545C, 545D, 555D, GSH15, GSH15-6...
320D, 330C L, 330D L, 336D, 336D2, 336E, 336E H, 336E L, 336E LH, 336F L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365B L, 365C, 36...
320E LRR, 320E RR, 323E L, 325D L, 328D LCR, 329D, 329D L, 329E, 329E L, 349D, 374D L, 374F L, 390D, 390D L, 390F L
345B II, 345C, 345C L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C
0965969
BOLT-SOCKET HEAD
312D, 315D L, 319D, 320D, 320D FM, 325D L, 330D L, 345C, 345C L, 365C, 385C, 385C FS, 385C L, 420D, 574, 621K, 623K, 623K LRC, 627K, 627K LRC, 725, 730, 735, 740, 770, 772, 924G, 924H, 928H, C9, CB-14...
312D, 315D L, 319D, 320D, 320D FM, 325D L, 330D L, 345C, 345C L, 365C, 385C, 385C FS, 385C L, 420D, 574, 621K, 623K, 623K LRC, 627K, 627K LRC, 725, 730, 735, 740, 770, 772, 924G, 924H, 928H, C9, CB-14...
226B, 226B3, 242B, 247B, 257B, 844K, 854K, 990K, 992K, 993K
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B
120M 2, 216B, 216B3, 226B, 226B3, 236D, 2384C, 242B, 242D, 246D, 247B, 247B3, 2484C, 257D, 259D, 262D, 267B, 268B, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP, 436, 525D, 535D, 545D, 555D, ...
120M, 12M, 14M, 205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 216B3, 224B, 226B, 226B3, 236D, 242B, 242D, 246C, 2470C, 247B, 256C, 2570C, 257B, 262C, 262C2, 2670C, 267B, 268B, 272C, 277C, 277C2, ...
2294895
BOLT-WHEEL
216B, 216B3, 226B, 226B3, 242B, 247B, 247B3
216B, 216B3, 226B, 226B3, 242B, 247B, 247B3
247B, 267B
246C, 256C, 262C, 262C2, 267B, 268B, 272D, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 299D, 307E, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 3406C, 3456, 963D, C15, C18, C9, M313D, M315D, M316D,...
0862369
BOLT-SOCKET HEAD
120H, 12H, 135H, 140H, 143H, 160H, 163H, 226B, 226B3, 232B, 236B, 242B, 247B, 247B3, 252B, 257B, 267B, 268B, 320B, 320B U, 321B, 322B, 325B, 325C, 330B, 554, 564, 574, 574B, 735, 735B, 740, 740B, 924H...
120H, 12H, 135H, 140H, 143H, 160H, 163H, 226B, 226B3, 232B, 236B, 242B, 247B, 247B3, 252B, 257B, 267B, 268B, 320B, 320B U, 321B, 322B, 325B, 325C, 330B, 554, 564, 574, 574B, 735, 735B, 740, 740B, 924H...
1240313
BOLT
267B, 268B
267B, 268B
3612657
BOLT-12 POINT HEAD
216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247B, 247B3, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 268B, 272C, 272D, 272D XHP, 277C, 2...
216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247B, 247B3, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 268B, 272C, 272D, 272D XHP, 277C, 2...
2437113
BOLT-CARRIAGE
267B, 287
267B, 287