7X2583 BOLT Caterpillar parts
2484C, 307, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320B, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D SA, 323D2 L, 330B L, 330C, 330D L, 330D MH, 3...
Rating:
Alternative (cross code) number:
CA7X2583
7X-2583
7X2583
CA7X2583
7X-2583
7X2583
Weight: 1 pounds 0 kg.
Information:
COATING/PLATING
Zinc-Dichromate Coating
GRIP LENGTH
54
mm
HEAD HEIGHT
19.48
mm
HEX SIZE
46
mm
LENGTH
120
mm
MATERIAL
Steel - 1040 MPa Min Tensile Strength
THREAD SIZE
M30X3.5
COLD PLANER, WHEEL SKIDDER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$11.33
10 Jul 2022
2.47[1.11] Pounds
US: ProperBuy
7X2583 Cap Screw Zinc Fits Caterpillar PM-201 PM-465 PM-565B 826G 836 836H
TCP Warranty
TCP Warranty
$17.99
01 Apr 2022
US: Florida-Parts-Z
Bolts for Caterpillar 7X2583 7X-2583 3066; 3116; 3126; 3126B; 826G; Ships Free!!
FIRST PRICE PARTS
FIRST PRICE PARTS
$17.99
01 Apr 2022
US: Florida-Parts-Z
Bolts for Caterpillar 7X2583 7X-2583 3066; 3116; 3126; 3126B; 826G; Ships Free!!
FIRST PRICE PARTS
FIRST PRICE PARTS
Number on catalog scheme:
3
For full view, you need register
Compatible equipment models: 7X2583:
EXCAVATOR
307
315D L
318D L
318D2 L
319D
319D L
319D LN
320B
320D
320D FM
320D GC
320D L
320D LN
320D2
320D2 GC
320D2 L
323D L
323D LN
323D SA
323D2 L
330B L
330C
330D L
330D MH
345B
345B II
345B II MH
345B L
345C
345C L
345C MH
345D
345D L
345D L VG
349D
349D L
349E
349E L
349E L VG
HAMMER
63
PULVERIZER
P16
SHEAR-DEMOLITION/SCRAP
S25
UNDERCARRIAGE
OEMS
UNDERGROUND ART TRUCK
AD45B
VIBRATORY COMPACTOR
CB-534
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-9022 Silicone Gasket -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Illustration 1 g01067633
Thoroughly clean the mating surfaces of the plate (18) and the front housing (15).
Install a new gasket (17) on plate (18). Note: Trim the gasket even with the bottom of the front housing after assembly.
Apply Tooling (A) to the bottom of gasket (17) in order to fill the space at the front housing and the engine oil pan.
Install front housing (15) on the dowel pins on the cylinder block.
Install bolts (19) for the engine oil pan to a torque of 55 10 N m (41 7 lb ft).
Illustration 2 g01067631
Install bolts (16) in front housing (15).
Install bolt (12).
Install the nut on stud (11).
Install bolts (13) and nuts (14) on the front housing.
Position strap (10) on the front housing and on the cylinder head and install bolts (9).
Illustration 3 g01067632
Position bracket (4) and install bolts (3).
Position clips (1) and (5) and install bolts (2).
Install bolts (6).
Position plate (8) on the studs. Install nuts (7) and the washer on the studs.
If necessary, install the accessory drive on the front housing. End By:
Install the crankshaft position sensor. Refer to Disassembly and Assembly, "Crankshaft Position Sensor - Remove and Install".
Install the camshaft position sensor. Refer to Disassembly and Assembly, "Camshaft Position Sensor - Remove and Install".
Install the auxiliary water pump, if necessary. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Install".
Install the pump drive, if necessary. Refer to Disassembly and Assembly, "Pump Drive - Install".
Install the crankshaft front seal and the wear sleeve. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Install".
Install the camshaft gear. Refer to Disassembly and Assembly, "Camshaft Gear - Remove and Install".
Install the air compressor, if necessary. Refer to Disassembly and Assembly, "Air Compressor - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-9022 Silicone Gasket -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Illustration 1 g01067633
Thoroughly clean the mating surfaces of the plate (18) and the front housing (15).
Install a new gasket (17) on plate (18). Note: Trim the gasket even with the bottom of the front housing after assembly.
Apply Tooling (A) to the bottom of gasket (17) in order to fill the space at the front housing and the engine oil pan.
Install front housing (15) on the dowel pins on the cylinder block.
Install bolts (19) for the engine oil pan to a torque of 55 10 N m (41 7 lb ft).
Illustration 2 g01067631
Install bolts (16) in front housing (15).
Install bolt (12).
Install the nut on stud (11).
Install bolts (13) and nuts (14) on the front housing.
Position strap (10) on the front housing and on the cylinder head and install bolts (9).
Illustration 3 g01067632
Position bracket (4) and install bolts (3).
Position clips (1) and (5) and install bolts (2).
Install bolts (6).
Position plate (8) on the studs. Install nuts (7) and the washer on the studs.
If necessary, install the accessory drive on the front housing. End By:
Install the crankshaft position sensor. Refer to Disassembly and Assembly, "Crankshaft Position Sensor - Remove and Install".
Install the camshaft position sensor. Refer to Disassembly and Assembly, "Camshaft Position Sensor - Remove and Install".
Install the auxiliary water pump, if necessary. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Install".
Install the pump drive, if necessary. Refer to Disassembly and Assembly, "Pump Drive - Install".
Install the crankshaft front seal and the wear sleeve. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Install".
Install the camshaft gear. Refer to Disassembly and Assembly, "Camshaft Gear - Remove and Install".
Install the air compressor, if necessary. Refer to Disassembly and Assembly, "Air Compressor - Remove and Install".
Cat SIS web machinery list:
Parts bolt Caterpillar catalog:
16M, 320D, 320D FM, 320D L, 320D2, 320D2 L, 320E, 320E LN, 322C, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 325C, 325D, 325D FM, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330C, 3...
320C, 325C, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 34...
320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LRR, 320D RR, 321C, 321D LCR, 323D L
1090, 2290, 320D, 320D FM, 322C FM, 324D FM, 324D FM LL, 325C, 325D, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 336E, 345C, 511, OEMS, TK711
330B L, 330C, 330C FM, 330C L, 330D FM, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 551, 552, OEMS, TK751, TK752
330, 330 FM L, 330 L, 330B, 330B L, 345B II, 345B II MH, 345B L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 350, 365B, 365B II, 365B L, 385B, 525C, 525D, 535C, 535D, 545C, 545D, 555D, GSH15, GSH15-6...
320D, 330C L, 330D L, 336D, 336D2, 336E, 336E H, 336E L, 336E LH, 336F L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365B L, 365C, 36...
320E LRR, 320E RR, 323E L, 325D L, 328D LCR, 329D, 329D L, 329E, 329E L, 349D, 374D L, 374F L, 390D, 390D L, 390F L
330, 330 FM L, 330 L, 374F L, 390F L, OEMS
325B L, 330, 330 FM L, 330 L, 330B, 330B L, OEMS
330, 330 FM L, 330 L, 330B, 330B L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, E300B, M330D, W330B
345B II, 345C, 345C L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C
0994460
BOLT
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
2964621
BOLT
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
2964762
BOLT
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN
1358579
BOLT AS
312D, 312D L, 312D2, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 320B, 320B FM LL, 320D, 320D L, 320D LN, 320D2, 320D2 L, 320E, 320E L, 320E LN, 322B LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 3...
312D, 312D L, 312D2, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 320B, 320B FM LL, 320D, 320D L, 320D LN, 320D2, 320D2 L, 320E, 320E L, 320E LN, 322B LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 3...
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
0969260
BOLT AS
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN
1850508
BOLT
311D LRR, 312C L, 312D, 312D L, 314D CR, 314D LCR, 315C, 315D L, 319D L, 319D LN
311D LRR, 312C L, 312D, 312D L, 314D CR, 314D LCR, 315C, 315D L, 319D L, 319D LN
3302033
BOLT
311D LRR, 312D, 312D L, 312D2, 312E, 312E L, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318D2 L, 318E L, 319D, 319D L, 319D LN
311D LRR, 312D, 312D L, 312D2, 312E, 312E L, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318D2 L, 318E L, 319D, 319D L, 319D LN
3244118
BOLT-SOCKET HEAD
308E, 308E CR, 308E SR, 311D LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318D L, 318D2 L, 318E L, 319D, 319...
308E, 308E CR, 308E SR, 311D LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318D L, 318D2 L, 318E L, 319D, 319...
315D L, 316E L, 318D2 L, 318E L, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LRR, 320D2, 320D2 GC, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 322C, 323D L, 323D LN, 323D...
2680727
BOLT AS-SPECIAL
311D LRR, 311F LRR, 312D, 312D L, 315D L, 319D L, 319D LN
311D LRR, 311F LRR, 312D, 312D L, 315D L, 319D L, 319D LN
4471733
BOLT
315D L, 319D L, 319D LN, 320D, 320D L, 320D2 L, 323D L, 323D LN, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L
315D L, 319D L, 319D LN, 320D, 320D L, 320D2 L, 323D L, 323D LN, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L