7X3335 BOLT Caterpillar parts
325, 325 L, 325 LN, 325D, 325D L, 329D, 329D L, 329D LN, 330 FM L, 330 L, 3516C, 5110B, 5130, 5130B, 5230, 5230B, 797, 797B, 797F, 953C, D350E II, D3G, D400E II, D4G, D7E, D7E LGP, E110B, E120B, E200B...
Rating:
Alternative (cross code) number:
CA7X3335
7X-3335
7X3335
CA7X3335
7X-3335
7X3335
Weight: 0.49 pounds 0 kg.
Information:
COATING/PLATING
Zinc-Dichromate Coating
GRIP LENGTH
191
mm
HEAD HEIGHT
7.76
mm
HEX SIZE
18
mm
LENGTH
240
mm
MATERIAL
Steel - 1040 MPa Min Tensile Strength
THREAD SIZE
M12X1.75
ARTICULATED TRUCK, TRUCK,
Compatible equipment models: 7X3335:
Number on catalog scheme:
7
For full view, you need register
Information:
Reference: Special Instruction 01, "Battery Test Procedure ", Page 8.Two major changes are now in effect regarding installing a new maintenance free battery. Add a note to the referenced Special Instructions referring to this article. These two changes are:
... Do NOT sell a battery as a new battery if its open circuit voltage (OCV) is less than 12.00 volts.All activated batteries slowly self-discharge while in stock at a rate closely related to ambient temperature. As the storage temperature increases, the rate of discharge increases. If, however, during storage the OCV has been allowed to fall below 12.00 volts, the batteries should NOT be sold as new and supported with warranty. The reason is the internal effect (sulfation and grid corrosion) of being in a low state of charge for a long period of time. Avoid this by stock turnover, especially when storage temperatures exceed 27 °C (80°F).
... New charging rates and times.These have been changed because Caterpillar no longer recommends boost charging, and the previous recommendations were insufficient for all instances where the OCV had fallen below 12.40 volts. Recharge at the rates and times shown in Step 4 of the following instructions.
These two new recommendations are applied by using the procedure in the following topic.
Whenever measuring the OCV, always use a digital type voltmeter such as 6V7070 or 6V7800 Multimeter to ensure the required accuracy. A moving coil-type voltmeter does not have sufficient accuracy.Using The New Recommendations
A new maintenance-free battery can normally be installed in a machine without charging and load testing. However, if a battery has been in storage for a long time, it can be partially discharged. Do the following steps before installing a maintenance free battery.
1. Measure open circuit voltage with a 6V7070 Multimeter with the selector on the 20 volt DC scale.2. If open circuit voltage is 12.40 volts or more, the battery can be installed.3. If open circuit voltage is less than 12.00 volts, do NOT sell the battery as a new battery.4. If open circuit voltage is 12.00 to 12.39 volts, charge the battery. Select the amps charge rate and the charging time from the following tables.
During charging, on-charge voltage must not exceed 16.0 volts. In order to keep on-charge voltage below 16.0 volts, charging amps may need to be reduced near the end of charging.
5. After charging, load test the battery at one-half the cold cranking amp (CCA) rating of the battery. Refer to PEKP9100 for CCA rating. If the voltage at 15 seconds is 9.5 volts or more, install the battery. If the voltage at 15 seconds is less than 9.5 volts, do NOT sell the battery as a new battery.
... Do NOT sell a battery as a new battery if its open circuit voltage (OCV) is less than 12.00 volts.All activated batteries slowly self-discharge while in stock at a rate closely related to ambient temperature. As the storage temperature increases, the rate of discharge increases. If, however, during storage the OCV has been allowed to fall below 12.00 volts, the batteries should NOT be sold as new and supported with warranty. The reason is the internal effect (sulfation and grid corrosion) of being in a low state of charge for a long period of time. Avoid this by stock turnover, especially when storage temperatures exceed 27 °C (80°F).
... New charging rates and times.These have been changed because Caterpillar no longer recommends boost charging, and the previous recommendations were insufficient for all instances where the OCV had fallen below 12.40 volts. Recharge at the rates and times shown in Step 4 of the following instructions.
These two new recommendations are applied by using the procedure in the following topic.
Whenever measuring the OCV, always use a digital type voltmeter such as 6V7070 or 6V7800 Multimeter to ensure the required accuracy. A moving coil-type voltmeter does not have sufficient accuracy.Using The New Recommendations
A new maintenance-free battery can normally be installed in a machine without charging and load testing. However, if a battery has been in storage for a long time, it can be partially discharged. Do the following steps before installing a maintenance free battery.
1. Measure open circuit voltage with a 6V7070 Multimeter with the selector on the 20 volt DC scale.2. If open circuit voltage is 12.40 volts or more, the battery can be installed.3. If open circuit voltage is less than 12.00 volts, do NOT sell the battery as a new battery.4. If open circuit voltage is 12.00 to 12.39 volts, charge the battery. Select the amps charge rate and the charging time from the following tables.
During charging, on-charge voltage must not exceed 16.0 volts. In order to keep on-charge voltage below 16.0 volts, charging amps may need to be reduced near the end of charging.
5. After charging, load test the battery at one-half the cold cranking amp (CCA) rating of the battery. Refer to PEKP9100 for CCA rating. If the voltage at 15 seconds is 9.5 volts or more, install the battery. If the voltage at 15 seconds is less than 9.5 volts, do NOT sell the battery as a new battery.
Cat SIS web machinery list:
Parts bolt Caterpillar catalog:
2384C, 2484C, 322 FM L, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 324D L, 330, 330 FM L, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D MH, 336D L, 336E L, 345B, 345B II, 345B I...
320C FM, 320D, 320D FM, 320D FM RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329D L, 329E, 329E L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 345D L, 349...
324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325D, 325D L, 326D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 3...
320B, 320C, 320D, 320D FM, 320D L, 320D2, 320D2 L, 320E, 320E LN, 321C, 322C, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D FM, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, ...
320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, 32...
325C, 330, 330 FM L, 330B L, 330C L, 330D, 330D L, 336D L, 345B, 345C, 345C L, 345D, 349D L, 350, 350 L, OEMS, TK1051
16M, 320D, 320D FM, 320D L, 320D2, 320D2 L, 320E, 320E LN, 322C, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 325C, 325D, 325D FM, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330C, 3...
1090, 2290, 320D, 320D FM, 322C FM, 324D FM, 324D FM LL, 325C, 325D, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 336E, 345C, 511, OEMS, TK711
330, 330 FM L, 330 L, 330B, 330B L, 345B II, 345B II MH, 345B L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 350, 365B, 365B II, 365B L, 385B, 525C, 525D, 535C, 535D, 545C, 545D, 555D, GSH15, GSH15-6...
320E LRR, 320E RR, 323E L, 325D L, 328D LCR, 329D, 329D L, 329E, 329E L, 349D, 374D L, 374F L, 390D, 390D L, 390F L
330, 330 FM L, 330 L, 374F L, 390F L, OEMS
325B L, 330, 330 FM L, 330 L, 330B, 330B L, OEMS
3189511
BOLT
AP-300D, AP-650B, AP-800D, C4.4, CP-533E, CS-533E
AP-300D, AP-650B, AP-800D, C4.4, CP-533E, CS-533E
2306375
BOLT
AD45, AD55, C4.4, C6.6, R1300, R1300G, R1300G II, R1600, R1600G, R1600H, R1700G, R2900, R2900G, R3000H
AD45, AD55, C4.4, C6.6, R1300, R1300G, R1300G II, R1600, R1600G, R1600H, R1700G, R2900, R2900G, R3000H
3410601
BOLT
C13 XQ350, C15, C27
C13 XQ350, C15, C27
374F L, 735B, 740B, 773G, 773G OEM, 775G, 775G OEM, 777G, 854K, 920, 926, 930, 930R, 936, 950, 980G, 992K, 993K, AD40, AE40, C15, C18, C27, C32, CX31-C18I, D11T, D8T, G936, IT28, R1700 II
120, 12E, 215, 225, 227, 245, 561H, 561N, 621, 623, 627, 627B, 631C, 633, 633C, 637, 637D, 641, 641B, 651E, 657B, 657E, 666, 772, 773, 773G, 773G OEM, 775G, 775G OEM, 777G, 814B, 815B, 824C, 825C, 826...
225D, 227, 229, 231D, 245B, 572R, 936, 936F, 950G, 963C, 966G II, 980C, 980F, AD55B, AD60, AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-245C, C27, D10T, D11N,...
5130, 5230, 994F, 994H, G3516H, G3520E
245, 245B, 245D, 3516C, 589, 623E, 623F, 623G, 631E, 631G, 633D, 633E II, 637D, 637E, 637G, 639D, 834B, 977L, 992, D8L, D9L, PL87
140H, 143H, 14M, 160H, 163H, 16M, 3126, 3126B, 3126E, 3516C, 525B, 535B, 545, 627K LRC, 725C, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, C9, D10T2
3233730
BOLT
16M, 301.4C, 302.7D, 3516C, 924K, 930K, 938K, 973D
16M, 301.4C, 302.7D, 3516C, 924K, 930K, 938K, 973D