9B7273 BOLT Caterpillar parts
D6H XL
Rating:
Alternative (cross code) number:
CA9B7273
9B-7273
9B7273
CA9B7273
9B-7273
9B7273
TRACK-TYPE TRACTOR,
Compatible equipment models: 9B7273:
Number on catalog scheme:
For full view, you need register
Information:
Connecting the Caterpillar Electronic Technician (Cat ET) to the Electronic Control Module (ECM)
Table 1
Tools Needed Qty
Personal Computer (PC) 1
Single user license for Cat ET
Use the most recent version of this software.
"JERD2124" 1
Software
Data subscription for all engines
"JERD2129" 1
171-4400 Communication Adapter Gp (1) 1
275-5120 Communication Adapter Gp (2) 1
7X-1414 Adapter Cable 1
237-7547 Adapter Cable As (3) 1
( 1 ) This item includes the 171-4401 Communication Adapter As .
( 2 ) This item includes the 275-5121 Communication Adapter As. The 7X-1700 Communication Adapter Gp may also be used.
( 3 ) This cable connects to the USB port on computers that are not equipped with a serial port.Cat ET is designed to run on a personal computer. For more information regarding the use of Cat ET and of the PC requirements for Cat ET, refer to the documentation that accompanies your Cat ET software.Cat ET can display the following information:
Parameters
Diagnostic codes
Event codes
Engine configuration
Status of the monitoring systemCat ET can perform the following functions:
Engine monitoring
Diagnostic tests
Sensor calibration
Flash downloading
Set parametersThe engine's power supply provides the communication adapter with 24 VDC. Use the following procedure to connect Cat ET and the communication adapter to the engine.
Turn the engine control switch to the OFF/RESET position.
Illustration 1 g01221508
Connecting the communication adapter (1) Personal Computer (PC) (2) 237-7547 Adapter Cable As (3) 196-0055 Adapter Cable As (4) 275-5121 Communication Adapter As (5) 275-5122 Adapter Cable As (6) 157-4829 Cable Adapter Note: Items (3), (4), and (5) are part of the 275-5120 Communication Adapter Gp. The 171-4400 Communication Adapter Gp or the 7X-1700 Communication Adapter Gp may also be used.
Connect cable (3) to the RS232 serial port of PC (1) .Note: If your PC is not equipped with a serial port, use the 237-7547 Adapter Cable As (2) in order to connect to the USB port. Connect one end of the adapter to the end of cable (3). Connect the other end of the adapter to a USB port on the PC.
Connect cable (3) to communication adapter (4) .
Connect cable (5) to communication adapter (4) .
Connect cable (5) to cable (6) .
Connect cable (6) to the service tool connector of the terminal box. Alternatively, connect the cable to the service tool connector on the control panel.
Turn the engine control switch to the STOP position. The engine should be OFF.If Cat ET and the communication adapter do not communicate with the ECM, refer to Troubleshooting, RENR5910, "Electronic Service Tool Will Not Communicate With ECM".Recommendations for Programming the System Configuration Parameters
For descriptions of the parameters, refer to Systems Operation, "Electronic Control System Parameters". The values of the parameters can be viewed on the "Configuration" screen of Cat ET.Programmable parameters enable the engine to be configured in order to meet the requirements of the application. The system configuration parameters must be programmed when the application is installed. Perform this programming before the
Table 1
Tools Needed Qty
Personal Computer (PC) 1
Single user license for Cat ET
Use the most recent version of this software.
"JERD2124" 1
Software
Data subscription for all engines
"JERD2129" 1
171-4400 Communication Adapter Gp (1) 1
275-5120 Communication Adapter Gp (2) 1
7X-1414 Adapter Cable 1
237-7547 Adapter Cable As (3) 1
( 1 ) This item includes the 171-4401 Communication Adapter As .
( 2 ) This item includes the 275-5121 Communication Adapter As. The 7X-1700 Communication Adapter Gp may also be used.
( 3 ) This cable connects to the USB port on computers that are not equipped with a serial port.Cat ET is designed to run on a personal computer. For more information regarding the use of Cat ET and of the PC requirements for Cat ET, refer to the documentation that accompanies your Cat ET software.Cat ET can display the following information:
Parameters
Diagnostic codes
Event codes
Engine configuration
Status of the monitoring systemCat ET can perform the following functions:
Engine monitoring
Diagnostic tests
Sensor calibration
Flash downloading
Set parametersThe engine's power supply provides the communication adapter with 24 VDC. Use the following procedure to connect Cat ET and the communication adapter to the engine.
Turn the engine control switch to the OFF/RESET position.
Illustration 1 g01221508
Connecting the communication adapter (1) Personal Computer (PC) (2) 237-7547 Adapter Cable As (3) 196-0055 Adapter Cable As (4) 275-5121 Communication Adapter As (5) 275-5122 Adapter Cable As (6) 157-4829 Cable Adapter Note: Items (3), (4), and (5) are part of the 275-5120 Communication Adapter Gp. The 171-4400 Communication Adapter Gp or the 7X-1700 Communication Adapter Gp may also be used.
Connect cable (3) to the RS232 serial port of PC (1) .Note: If your PC is not equipped with a serial port, use the 237-7547 Adapter Cable As (2) in order to connect to the USB port. Connect one end of the adapter to the end of cable (3). Connect the other end of the adapter to a USB port on the PC.
Connect cable (3) to communication adapter (4) .
Connect cable (5) to communication adapter (4) .
Connect cable (5) to cable (6) .
Connect cable (6) to the service tool connector of the terminal box. Alternatively, connect the cable to the service tool connector on the control panel.
Turn the engine control switch to the STOP position. The engine should be OFF.If Cat ET and the communication adapter do not communicate with the ECM, refer to Troubleshooting, RENR5910, "Electronic Service Tool Will Not Communicate With ECM".Recommendations for Programming the System Configuration Parameters
For descriptions of the parameters, refer to Systems Operation, "Electronic Control System Parameters". The values of the parameters can be viewed on the "Configuration" screen of Cat ET.Programmable parameters enable the engine to be configured in order to meet the requirements of the application. The system configuration parameters must be programmed when the application is installed. Perform this programming before the
Caterpillar parts catalog:
Parts bolt Caterpillar catalog:
120, 120B, 120G, 12E, 12G, 130G, 140, 140B, 140G, 14E, 14G, 14H, 14H NA, 16, 160G, 16G, 16H, 16H NA, 215B, 225, 229D, 231D, 235, 235B, 235C, 235D, 245, 3208, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 34...
118, 120G, 128, 129, 12E, 12G, 130G, 140, 14G, 163, 1673, 1673B, 1673C, 1676, 1693, 172, 173B, 191, 215, 215B, 225, 225D, 227, 229, 229D, 235, 235B, 235C, 245, 25, 3114, 3116, 3126B, 3160, 3176, 3176B...
1140, 1145, 1150, 1160, 120B, 120G, 12E, 140, 140B, 141, 14E, 16, 1673, 1673B, 1673C, 1674, 1676, 1693, 16G, 183B, 191, 212, 214, 215, 215B, 225, 229, 235, 235B, 235C, 235D, 245, 245B, 245D, 30/30, 31...
1090, 118, 119, 1190, 1190T, 120B, 120G, 1290T, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 130G, 1390, 140B, 140G, 140H, 140H ES, 140H NA, 141, 143H, 14E, 14G, 14H, 14H NA, 153, 16, 160G, 160H, 160H ES, 160H...
120G, 12G, 12H ES, 12H NA, 130G, 140G, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 160G, 160H ES, 160H NA, 163H NA, 16G, 16H, 16H NA, 227, 235C, 245B, 3208, 320B, 320D, 320D FM, 320D L, 320D2, 322B LN, ...
215B, 215D, 219D, 225, 227, 229, 229D, 235B, 235C, 235D, 3126B, 3306, 3306B, 3406B, 3406E, 3456, 350, 3512C, 3516C, 365B, 365B II, 365B L, 375, 375 L, 5080, 517, 518, 518C, 527, 611, 613G, 615C, 621B,...
115, 120M, 12M, 140M, 160M, 213B, 214B, 224B, 311, 315D L, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B U, 320C, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR,...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, 163H ...
10 FT, 10-20B, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M, 160M 2, 160M 3, 160M 3 ...
7X3181
BOLT
966F, 980C, 980F, D5H, D6H, D6H XL, D7H
966F, 980C, 980F, D5H, D6H, D6H XL, D7H
2540225
BOLT-TRACK MASTER
953C, 953D, D5H XL, D6M, D6N, D6N LGP
953C, 953D, D5H XL, D6M, D6N, D6N LGP
AD40, AD45, AE40, AE40 II, D11N, D11R, D11T, D250D, D250E, D25D, D300D, D300E, D350E, D400E, D40D, D4H, D4H XL, PL83, PL87, R1700G, RR-250, SS-250
8C5097
BOLT
D4H, D4H XL, D5H
D4H, D4H XL, D5H
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 963, 973, 992C, D4H, D4H XL, D5H, D7H
8T6922
BOLT-SOCKET HEAD
D350E II, D400E II, D4H, D4H XL, D5H, D7H
D350E II, D400E II, D4H, D4H XL, D5H, D7H
16, 910, 931B, 931C, 933, 935B, D3, D3B, D3C III
515, 518, 518C, 525, 525B, 525C, 528, 528B, 530B, 535B, 535C, 545, 545C, 931B, 933, D3, D3C III, D4C III
931, 931B, 931C, 933, 935B, 939, 941, 951B, 955H, 955K, 955L, D3, D3B, D3C, D3C III, D4B, D4C, D4C III, D4D, D4E, D4E SR, D5C, D5C III
7X0491
BOLT
5130, 5130B, 5230, 5230B, 776C, 776D, 777B, 777D, 784B, 785, 785B, 789B, 793B, 931B, 931C, 931C II, 933, 939, 994, D3B, D3C, D3C II, D3C III, D4C, D4C III, D5C III
5130, 5130B, 5230, 5230B, 776C, 776D, 777B, 777D, 784B, 785, 785B, 789B, 793B, 931B, 931C, 931C II, 933, 939, 994, D3B, D3C, D3C II, D3C III, D4C, D4C III, D5C III
10S, 651E, 657E, 854G, 854K, 924G, 924K, 930K, 938G, 938G II, 938K, 950, 950B, 950F II, 950G, 950G II, 950H, 950K, 953B, 953C, 955L, 960F, 962G, 962G II, 962H, 962K, 963, 963B, 963C, 963D, 966C, 966D,...
225D, 229, 229D, 325 LN, 325B L, 330, 330 FM L, 651E, 657E, 854G, 950 GC, 950B, 950B/950E, 950F, 950F II, 950G II, 950H, 950K, 953B, 953C, 953D, 955L, 960F, 962G II, 962H, 962K, 963, 963B, 963C, 963D,...