9J7758 BOLT Caterpillar parts
120G, 12G, 130G, 14G, 16G, 215, 215B, 225, 227, 235D, 245, 245B, 245D
Rating:
Alternative (cross code) number:
CA9J7758
9J-7758
9J7758
CA9J7758
9J-7758
9J7758
Weight: 0.20 pounds 0 kg.
EXCAVATOR, MOTOR GRADER,
Compatible equipment models: 9J7758:
Information:
Removal Procedure
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the engine oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Engine Oil - Change".
Illustration 1 g01174241
Remove bolts (2) . Remove engine oil pan (1) and the gasket.Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     -     Loctite 598 Black High Performance RTV Silicone Gasket Maker     -    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01174241
Illustration 3 g00612810
Clean the mating surface of engine oil pan (1) and the cylinder block. Apply Tooling (A) to four areas on the sealing surface of the oil pan. The areas are Marked Location (Y) .
Place a new gasket and engine oil pan (1) on the cylinder block.
Tighten four Oil Pan Bolts (X) .
Start with Bolt (Z) and tighten all remaining bolts (2) in a counterclockwise sequence.
Tighten bolts (2) to a torque of 31 1 N m (23 1 lb ft).
Start again with Bolt (Z) and tighten all remaining bolts in a counterclockwise sequence.
Tighten bolts (2) again to a torque of 31 1 N m (23 1 lb ft).
Fill the engine with oil to the correct level. Refer to Operation and Maintenance Manual, "Engine Oil - Change" and Operation and Maintenance Manual, "Capacities (Refill)".
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the engine oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Engine Oil - Change".
Illustration 1 g01174241
Remove bolts (2) . Remove engine oil pan (1) and the gasket.Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     -     Loctite 598 Black High Performance RTV Silicone Gasket Maker     -    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01174241
Illustration 3 g00612810
Clean the mating surface of engine oil pan (1) and the cylinder block. Apply Tooling (A) to four areas on the sealing surface of the oil pan. The areas are Marked Location (Y) .
Place a new gasket and engine oil pan (1) on the cylinder block.
Tighten four Oil Pan Bolts (X) .
Start with Bolt (Z) and tighten all remaining bolts (2) in a counterclockwise sequence.
Tighten bolts (2) to a torque of 31 1 N m (23 1 lb ft).
Start again with Bolt (Z) and tighten all remaining bolts in a counterclockwise sequence.
Tighten bolts (2) again to a torque of 31 1 N m (23 1 lb ft).
Fill the engine with oil to the correct level. Refer to Operation and Maintenance Manual, "Engine Oil - Change" and Operation and Maintenance Manual, "Capacities (Refill)".
Cat SIS web machinery list:
Parts bolt Caterpillar catalog:
8T6473
BOLT-LOCKING
12G, 12H, 12H ES, 12H NA, 12K, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
12G, 12H, 12H ES, 12H NA, 12K, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
6G0901
BOLT
16G, 16H, 16H NA
16G, 16H, 16H NA
8T6470
BOLT-LOCKING
16G, 16H, 16H NA
16G, 16H, 16H NA
4F3664
BOLT
120G, 12E, 140B, 14E
120G, 12E, 140B, 14E
6D8671
BOLT
12F, 14E, 14G, 16
12F, 14E, 14G, 16
7D0053
BOLT
120G, 12G, 130G, 140G
120G, 12G, 130G, 140G
9D3288
BOLT (draft)
12G, 130G, 140G
12G, 130G, 140G
2G9632
BOLT
14G, 16G
14G, 16G
6V4250
BOLT
120G, 12G, 130G
120G, 12G, 130G
8J1603
BOLT
235, 245
235, 245
8K4100
BOLT
245
245
3L0216
BOLT
225
225
4B6208
BOLT
16G, 213B, 227, 235, 631C, 633C, 637, 641B, 657B, 955K, 955L, 977D, D10, D5, D6C
16G, 213B, 227, 235, 631C, 633C, 637, 641B, 657B, 955K, 955L, 977D, D10, D5, D6C
8J4491
BOLT
225, 225D, 235, 245, 350 L, 375, 5080
225, 225D, 235, 245, 350 L, 375, 5080
5C4554
BOLT
225, 235
225, 235
5P1893
BOLT
215, 215B, 215D, 219D, 225, 225D, 229, 229D, 231D, 235, 235C, 235D, 245, 988B, 992C, 992D, D7H, D8N, R1300
215, 215B, 215D, 219D, 225, 225D, 229, 229D, 231D, 235, 235C, 235D, 245, 988B, 992C, 992D, D7H, D8N, R1300
5L4183
BOLT-SOCKET HEAD
215, 225, 508, 518C, 528, 528B, 530B, 623, 627, 627B, 637D, 641B, 657B, 834B, 910, 920, 926, 930, 950, 980C, 988F II, CS-323, CS-643, D3, IT12, IT38F, IT38G, IT38G II, IT38H
215, 225, 508, 518C, 528, 528B, 530B, 623, 627, 627B, 637D, 641B, 657B, 834B, 910, 920, 926, 930, 950, 980C, 988F II, CS-323, CS-643, D3, IT12, IT38F, IT38G, IT38G II, IT38H
3V5012
BOLT
245
245
6J7857
BOLT
235, 245
235, 245
1M6116
BOLT
235
235
4K0487
BOLT
225, 561D, 824B, 825B, 941, 988, D4E, D5B, D5E, D6D, D6E SR
225, 561D, 824B, 825B, 941, 988, D4E, D5B, D5E, D6D, D6E SR