BOLT F1035-06016 - Caterpillar

TERMINATION DATE
30Apr2020
PROBLEM
The existing parking brake 329-5064 Solenoid Valve Group can fail on certain 525D, 535D, 545D, and 555D Wheel Skidders. If the existing solenoid valve group fails, it can result in the inability to release the parking brake.
AFFECTED PRODUCT
Model Identification Number
525D 2L500100-00178
GKP00100-00536
535D 3L500100-00147
MTP00100-00477
545D 4L500100-00193
KGP00100-00303
555D 5L500100-00128
PGY00100-00164
PARTS NEEDED
Qty
Part Number Description
1 3517535 VALVE GP-SOL
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 8% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Remove the existing 329-5064 Solenoid Valve Group, used to control the release of the parking brake, from the rear valve manifold on the machine.
Install a new 351-7535 Solenoid Valve Group in the 454-8977 Rear Valve Manifold on the machine. Note the correct orientation of the 354-7468 Solenoid Coil Assembly on the 351-7535 Solenoid Valve Group when installed in the 454-8977 Rear Valve Manifold. Refer to Image1.
Image1
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-4000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
4001-6000 hrs,
25-36 mo 33.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 1.0-hour job
Note: This Service Letter program applies only to the 329-5064 Solenoid Valve Group that is used to control the parking brake. This program does NOT apply to the other 329-5064 Solenoid Valve Groups that are used on the machine.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.