S1595 BOLT Caterpillar parts
12F
Rating:
Alternative (cross code) number:
CAS1595
S-1595
S1595
CAS1595
S-1595
S1595
MOTOR GRADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Transmission Mount Compatible with for 2000-2005 Chysler/Dodge/Plymouth Neon 2.0L MANUAL | A5301, EM3050, 3050 - S1595
Allucam Vehicle Info: Compatible with 2000-2005 Chrysler Neon 2.0L 5 Speed Manual Transmission, Compatible with 2000-2005 Dodge Neon 2.0L 5 Speed Manual Transmission, Compatible with 2000-2005 Plymouth Neon 2.0L 5 Speed Manual Transmission || Includes : 1 Transmission Mount || OE specification and design || One time replacement for parts,5 year warranty || See the product description below to find vehicle compatibility details || Interchange Numbers: A5301 || Other Part Numbers: EM3050, 3050 || Do not use air gun or any power tool when installing motor and transmission mount. Only use hand torque tool to tighten the nuts and bolts to avoid damage to parts.
Allucam Vehicle Info: Compatible with 2000-2005 Chrysler Neon 2.0L 5 Speed Manual Transmission, Compatible with 2000-2005 Dodge Neon 2.0L 5 Speed Manual Transmission, Compatible with 2000-2005 Plymouth Neon 2.0L 5 Speed Manual Transmission || Includes : 1 Transmission Mount || OE specification and design || One time replacement for parts,5 year warranty || See the product description below to find vehicle compatibility details || Interchange Numbers: A5301 || Other Part Numbers: EM3050, 3050 || Do not use air gun or any power tool when installing motor and transmission mount. Only use hand torque tool to tighten the nuts and bolts to avoid damage to parts.
OMNI5 S1595 Fits 2000-2005 Chysler/Dodge/Plymouth Neon 2.0L MANUAL Transmission Mount | A5301, EM3050, 3050
OMNI5 To ensure the product's compatibility, send us a message with your VIN # & Transmission type. || You can also check fitment using Amazon's Fitment Stripe at the top of the page. || Designed to Replace OE || Five year warranty, one time replacement (for parts) || Sent out within 1 business day excluding holidays
OMNI5 To ensure the product's compatibility, send us a message with your VIN # & Transmission type. || You can also check fitment using Amazon's Fitment Stripe at the top of the page. || Designed to Replace OE || Five year warranty, one time replacement (for parts) || Sent out within 1 business day excluding holidays
OMNI5 S1595 Fits 2000-2005 Chysler/Dodge/Plymouth Neon 2.0L MANUAL Transmission Mount | A5301, EM3050, 3050
OMNI5 To ensure the product's compatibility, send us a message with your VIN # & Transmission type. || You can also check fitment using Amazon's Fitment Stripe at the top of the page. || Designed to Replace OE || Five year warranty, one time replacement (for parts) || Sent out within 1 business day excluding holidays
OMNI5 To ensure the product's compatibility, send us a message with your VIN # & Transmission type. || You can also check fitment using Amazon's Fitment Stripe at the top of the page. || Designed to Replace OE || Five year warranty, one time replacement (for parts) || Sent out within 1 business day excluding holidays
Number on catalog scheme:
29
For full view, you need register
Compatible equipment models: S1595:
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the turbocharger is clean and free from damage. Inspect the turbocharger for wear. Refer to Systems Operation, Testing and Adjusting, "Turbocharger - Inspect" for more information. If the turbocharger is worn, the complete turbocharger must be replaced.
Illustration 1 g02868256
If necessary, follow Step 2.a through Step 2.g in order to install boost pressure chamber cover (33).
Position gasket (27) (not shown) onto boost pressure chamber cover (33).
Position boost pressure chamber cover onto the engine oil cooler and install bolts (30). Tighten the bolts to a torque of 10 N m (89 lb in)
Install a new sealing washer (32) to banjo bolt (31). Install the banjo bolt assembly to hose assembly (26) and install the remaining sealing washer (32). Install hose assembly (26) to boost pressure chamber cover (33) finger tight.
Install tube assembly (26) into clip (25).
Install a new sealing washer (29) to banjo bolt (28). Install the banjo bolt assembly to hose assembly (8) and install the remaining sealing washer (28). Install hose assembly (8) to boost pressure chamber cover (33) finger tight.
Tighten banjo bolt (28) and banjo bolt (32) to a torque of 12 N m (106 lb in).
Install the alternator and mounting bracket. Refer to Disassembly and Assembly, "Alternator - Remove and Install" for the correct procedure.
Illustration 2 g02868099
Illustration 3 g02719524
Test the turbocharger actuator for correct operation. Refer to Systems Operation, Testing and Adjusting, "Turbocharger - Inspect" for more information. If the actuator is damaged or the actuator does not operate within the specified limits, the complete turbocharger must be replaced.
If necessary, follow Step 4 through Step 4.f in order to install tube assembly (9).
Install new O-ring seal (19) (not shown) to tube assembly (9).
Install tube assembly (9) to the cylinder block.
Install bolt (17) to tube assembly (9). Tighten the bolt to a torque of 25 N m (221 lb in).
Install O-ring seal (15) (not shown) to tube assembly (18).
Install tube assembly (18) to the oil cooler assembly. Install bolts (16) to tube assembly (18). Tighten the bolts to a torque of 25 N m (221 lb in).
Fill the coolant from the coolant system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Clean the gasket surface of exhaust manifold (24). If necessary, install studs (22) to exhaust manifold (24) and turbocharger (14). Tighten the studs to a torque of 15 N m (133 lb in).
Install a new gasket (23) (not shown) to the exhaust manifold.
Position turbocharger (14) onto exhaust manifold (24) and install washers (21) and new nuts (20). Tighten the nuts to a torque of 28 N m (248 lb in). Note: Do not use the actuator rod to lift the turbocharger.
Illustration 4 g02847785
Position a new gasket (13) (not shown) onto tube assembly (9).
Position tube assembly (9) onto the turbocharger.
Install bolts (12) finger tight.
Tighten bolts (12) to a torque of 10 N m (89 lb in).
Lubricate the bearings of the turbocharger with clean engine oil through the oil inlet
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the turbocharger is clean and free from damage. Inspect the turbocharger for wear. Refer to Systems Operation, Testing and Adjusting, "Turbocharger - Inspect" for more information. If the turbocharger is worn, the complete turbocharger must be replaced.
Illustration 1 g02868256
If necessary, follow Step 2.a through Step 2.g in order to install boost pressure chamber cover (33).
Position gasket (27) (not shown) onto boost pressure chamber cover (33).
Position boost pressure chamber cover onto the engine oil cooler and install bolts (30). Tighten the bolts to a torque of 10 N m (89 lb in)
Install a new sealing washer (32) to banjo bolt (31). Install the banjo bolt assembly to hose assembly (26) and install the remaining sealing washer (32). Install hose assembly (26) to boost pressure chamber cover (33) finger tight.
Install tube assembly (26) into clip (25).
Install a new sealing washer (29) to banjo bolt (28). Install the banjo bolt assembly to hose assembly (8) and install the remaining sealing washer (28). Install hose assembly (8) to boost pressure chamber cover (33) finger tight.
Tighten banjo bolt (28) and banjo bolt (32) to a torque of 12 N m (106 lb in).
Install the alternator and mounting bracket. Refer to Disassembly and Assembly, "Alternator - Remove and Install" for the correct procedure.
Illustration 2 g02868099
Illustration 3 g02719524
Test the turbocharger actuator for correct operation. Refer to Systems Operation, Testing and Adjusting, "Turbocharger - Inspect" for more information. If the actuator is damaged or the actuator does not operate within the specified limits, the complete turbocharger must be replaced.
If necessary, follow Step 4 through Step 4.f in order to install tube assembly (9).
Install new O-ring seal (19) (not shown) to tube assembly (9).
Install tube assembly (9) to the cylinder block.
Install bolt (17) to tube assembly (9). Tighten the bolt to a torque of 25 N m (221 lb in).
Install O-ring seal (15) (not shown) to tube assembly (18).
Install tube assembly (18) to the oil cooler assembly. Install bolts (16) to tube assembly (18). Tighten the bolts to a torque of 25 N m (221 lb in).
Fill the coolant from the coolant system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Clean the gasket surface of exhaust manifold (24). If necessary, install studs (22) to exhaust manifold (24) and turbocharger (14). Tighten the studs to a torque of 15 N m (133 lb in).
Install a new gasket (23) (not shown) to the exhaust manifold.
Position turbocharger (14) onto exhaust manifold (24) and install washers (21) and new nuts (20). Tighten the nuts to a torque of 28 N m (248 lb in). Note: Do not use the actuator rod to lift the turbocharger.
Illustration 4 g02847785
Position a new gasket (13) (not shown) onto tube assembly (9).
Position tube assembly (9) onto the turbocharger.
Install bolts (12) finger tight.
Tighten bolts (12) to a torque of 10 N m (89 lb in).
Lubricate the bearings of the turbocharger with clean engine oil through the oil inlet
Caterpillar parts catalog:
Parts bolt Caterpillar catalog:
10S, 120B, 120G, 120H, 120H ES, 120H NA, 128, 12F, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140, 140B, 140G, 140H, 140H ES, 140H NA, 141, 143H, 14E, 14G, 14H, 14H NA, 153, 16, 160G, 160H, 160H E...
118, 119, 120, 120B, 120G, 120H ES, 120H NA, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 130G, 135H NA, 140, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14E, 14G, 14H, 14H NA, 160G, 160H, 160H NA, 163H, 163H NA...
120, 120B, 120G, 120H, 120H ES, 120H NA, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140, 140B, 140G, 140H, 140H ES, 140H NA, 140M, 143H, 14E, 14M, 16, 160G, 160H, 160H NA, 160M, 163H, 16...
10S, 118, 119, 120, 120B, 120G, 120H, 120H ES, 120H NA, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14E, 14G, 14H, 14H NA...
120G, 12F, 12G, 140, 140G, 140H, 140H NA, 14E, 16, 160G, 215, 215B, 215D, 315C, 320C, 322C, 325B L, 416B, 416C, 416D, 420D, 424B, 424B HD, 424D, 426C, 428, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 43...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14E, 14G, 14H NA, 153, 16, 160G, 160H, 160H ES, 1...
120G, 120H, 120H ES, 120H NA, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 143H, 14E, 16, 160G, 160H, 160M, 216, 216B, 216B3, 226B, 226B3, 22...
12F, 14E, 561B, 561C, 583H, 941, 951B, 955C, 955H, 955K, 955L, 977D, 977H, 977K, 977L, 983, D4D, D5, D5B, D5E, D6C, D6D, D6E, D6E SR, D6F SR, D6G, D6G SR, D6G2 LGP, D6G2 XL, D7F, D8H, D8K
12F, 769
6D4957
BOLT
12F, 14E, 16
12F, 14E, 16
12F
12F
6D4957
BOLT
12F, 14E, 16
12F, 14E, 16
2D8293
BOLT
12E, 16
12E, 16
4D4912
BOLT
16
16
9M8366
BOLT
14E, 16
14E, 16
9F0121
BOLT
120B, 12E, 12F, 12G, 140B, 14E
120B, 12E, 12F, 12G, 140B, 14E
1A8603
BOLT
12E
12E
6D4861
BOLT
16
16
S1587
BOLT
12F
12F
S1589
BOLT
12F
12F
12F
S1573
BOLT
12F
12F
12F