2P7310 BONNET Caterpillar parts
950, D5, D6C
Rating:
Alternative (cross code) number:
CA2P7310
2P-7310
2P7310
CA2P7310
2P-7310
2P7310
Weight: 0.75 pounds 0 kg.
TRACK-TYPE TRACTOR, WHEEL LOADER,
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Personal injury can result from failure to disconnect the battery.First, disconnect the negative battery cable. Then, disconnect the positive battery cable.A positive power lead can cause sparks if the battery is not disconnected. Sparks can possibly result in battery explosion or fire.
Turn the battery disconnect switch to the "OFF" position.
Illustration 1 g01208927
Place an index mark on all of the harness assemblies. Disconnect the harness assemblies from electric starting motor (1).
Fasten a suitable lifting device to electric starting motor (1). The weight of electric starting motor (1) is approximately 37 kg (80 lb).
Remove bolts (2).
Remove electric starting motor (1) and the gasket from the flywheel housing. Installation Procedure
Illustration 2 g01208927
Fasten a suitable lifting device to electric starting motor (1). The weight of electric starting motor (1) is approximately 37 kg (80 lb).
Position the gasket and electric starting motor (1) in the flywheel housing. Install bolts (2).
Connect the harness assemblies to electric starting motor (1). Refer to Specifications, "Electric Starting Motor".
Turn the battery disconnect switch to the "ON" position.
Personal injury can result from failure to disconnect the battery.First, disconnect the negative battery cable. Then, disconnect the positive battery cable.A positive power lead can cause sparks if the battery is not disconnected. Sparks can possibly result in battery explosion or fire.
Turn the battery disconnect switch to the "OFF" position.
Illustration 1 g01208927
Place an index mark on all of the harness assemblies. Disconnect the harness assemblies from electric starting motor (1).
Fasten a suitable lifting device to electric starting motor (1). The weight of electric starting motor (1) is approximately 37 kg (80 lb).
Remove bolts (2).
Remove electric starting motor (1) and the gasket from the flywheel housing. Installation Procedure
Illustration 2 g01208927
Fasten a suitable lifting device to electric starting motor (1). The weight of electric starting motor (1) is approximately 37 kg (80 lb).
Position the gasket and electric starting motor (1) in the flywheel housing. Install bolts (2).
Connect the harness assemblies to electric starting motor (1). Refer to Specifications, "Electric Starting Motor".
Turn the battery disconnect switch to the "ON" position.
Caterpillar parts catalog:
Parts bonnet Caterpillar catalog:
2P7840
BONNET GROUP
518, 920, 930, 941, 950, D4D, D6C, D7F
518, 920, 930, 941, 950, D4D, D6C, D7F
2P7839
BONNET GROUP
561C, 951B, 955K, 955L, 977K, D4D, D5, D6C
561C, 951B, 955K, 955L, 977K, D4D, D5, D6C
120G, 12G, 130G, 140G, 143H, 14G, 14H NA, 160G, 160H, 3304, 3304B, 3306, 3306B, 920, 941, 950, D4D, D5, D5H, D6C, D6D, D6E SR, D6G SR, D7F
1673, 1673B, 1676, 3304, 3306, 621R, 623, 941, 950, 955H, 966C, 980, D330A, D330B, D333A, D333B, D336, D4D, D5, D6C, D7F, D7G
12G, 130G, 1673C, 215, 225, 235, 3160, 3208, 3304, 3306, 518, 613B, 637D, 639D, 920, 941, 950, 955L, 977K, 980B, D4D, D5, D6C, D6D, D7F, D7G
14E, 518, 561C, 920, 930, 941, 950, 951B, 955K, 955L, 966C, 977K, D4D, D5, D6C, D7F
9S0048
BONNET
941, 950, D6C, D7F
941, 950, D6C, D7F
2P5050
BONNET
950, D4D, D6C, D7F
950, D4D, D6C, D7F
2Y2583
BONNET
930, D4E, D6C, D6D
930, D4E, D6C, D6D
4N1367
BONNET
621B
621B
3735766
BONNET AS
300.9D
300.9D
235B, 572R, D7H, D7R
2M5469
BONNET
D353C, D9E
D353C, D9E
4L7716
BONNET ASSEM.
D342
D342
5L8508
BONNET ASSEM.
D342, G342C
D342, G342C
7N6656
BONNET-TORQUE CONVERTER
589, D8L
589, D8L
1W7345
BONNET
589, D8L
589, D8L
D6H, D6H XL, D6H XR, D6R, D7H
7N6205
BONNET
215
215
7N9370
BONNET
215
215
6N1131
BONNET
571G, 572G, D6C, D7G
571G, 572G, D6C, D7G