BONNET 3379976 - Caterpillar

Illustration 1 g00039117
Illustration 2 g00100018
Illustration 3 g00039122
The operator's seat that is provided with this machine is in compliance with the appropriate class of "ISO 7096".Note: Adjust the seat for a new operator or at the beginning of each shift.The operator should be seated against the seat backrest. Adjust the seat so that the operator is allowed full travel of the pedals.Back Angle Adjustment - Lift handle (1) and allow the seat back to tilt forward. Push the front of the backrest in order to tilt the seat backward. Release handle (1) at the desired position. Adjustment of the Seat Height - Remove the weight from the seat. Lift the seat height level lever (2) to the stop position. Hold handle (2) upward and raise the seat upward. Push the seat downward. Release the handle at one of the three positions.Fore/Aft Adjustment - Lift up on fore/aft handle (3). Move the seat forward or move the seat rearward until the desired position is attained. Release the handle in order to lock the seat into position.Angle Adjustment for the Bottom Cushion - Lift up on the seat cushion tilt handle (4). The seat will raise upward. In order to lower the seat, push the front of the seat cushion downward. Release the handle at one of the three positions.Weight Adjustment - Position the seat to the middle position. Extend the lever that is used for cranking from knob (6). Rotate the crank to the minus position in order to reduce the weight setting. Rotate the crank to the plus position in order to increase the weight setting. Refer to indicator (9) for the approximate weight setting. Release the crank at the desired setting.Adjustment for the Lumbar Support - Rotate knob (7) to one of three positions in order to attain more support or less support for the lower back.Retractable Seat Belt - When the seat has been adjusted to fit the operator, secure retractable seat belt (8) .Back Height Extension - Lift up on extension (5) in order to remove the extension. When you install extension (5), push the extension all the way downward. The extension should touch the top of the seat.