BONNET 7W0040 - Caterpillar

Illustration 5 g03812229
Flow Rate Adjustments
(1) Home screen
(2) Emulsion control icon
(3) Emulsion control screen
(4) Flow rate adjustment
(5) Keypad icon
(6) Manual icon
(7) Flow rate screen
(8) Back icon
(9) OK icon
(10) Flow rate adjustment keypad The "Emulsion Control" screen (3) allows the operator to make flow rate adjustment (4) when operating in MANUAL mode. Icon (6) indicates current operating mode of the system. To increase the flow rate number, the operator must touch the "+" symbol at the right end of the "Flow Rate" increment/decrement bar. The operator must touch the "-" symbol on the bar to decrease the flow rate number.Note: The "Flow Rate" increment/decrement bar appears on the screen when spray mode is set to the MANUAL mode. The bar displays the desired flow rate in either gallons per minute or liters per minute.The "Keypad" icon (5) can be used to access the "Flow Rate" screen (7). When the "Keypad" icon is touched, flow rate adjustment keypad (10) is visible. In this case, the operator enters the desired "Flow Rate" number on the keypad. The operator must touch the "OK" icon (9) to set the desired flow rate. The operator must touch the "Back" icon (8) to return to the previous menu. Note: If the entered number is outside the acceptable range, "***" is shown. If this string is shown, the operator must re-enter the desired value within the acceptable range and touch the "OK" icon (8). The newly entered number appears in the "Flow Rate" increment/decrement bar on the "Emulsion Control" screen (3).Note: Once the flow rate is set, the settings remain in effect regardless of changes to the spray mode or cycles of the engine start switch.Application Rate
Illustration 6 g03812231
Application Rate Adjustments
(1) Home screen
(2) Emulsion control icon
(3) Emulsion control screen
(4) Application rate adjustment
(5) Keypad icon
(6) Auto icon
(7) Application rate screen
(8) Back icon
(9) OK icon
(10) Application rate adjustment keypad The "Emulsion Control" screen (3) allows the operator to make application rate adjustment (4) when operating in AUTO mode. To increase the application rate number, the operator must touch the "+" symbol at the right end of the "Application Rate" increment/decrement bar. The operator must touch the "-" symbol on the bar to decrease the application rate number.Note: The "Application Rate" increment/decrement bar appears on the screen when spray mode is set to the AUTO mode. The bar displays the desired application rate in either gallons per minute or liters per minute.The "Keypad" icon (5) can be used to access the "Application Rate" screen (7). When the "Keypad" icon is touched, application rate adjustment keypad (10) is visible. In this case, the operator enters the desired "Application Rate" number on the keypad. The operator must touch the "OK" icon (9) to set the desired application rate. The operator must touch the "Back" icon (8) to return to the previous menu. Note: If the entered number is outside the acceptable range, "***" is shown. If this string is shown, the operator must re-enter the desired value within the acceptable range and touch the