BOOM AS 1205266 - Caterpillar

Illustration 1 g03680785
Table 1
Specification for 415-5192 Front Idler Gp    
Item     Qty     Part     Specification Description    
1     1     422-0832 Rod As     After assembly bore is
39.950 to 39.975 mm (1.5728 to 1.5738 inch).    
2     1     415-5194 Dust Seal     Lubricate the bore and sealing lip with the lubricant that is being sealed.    
3     1     095-1794 Backup Ring     Lubricate the bore and ring with the lubricant that is being sealed.    
4     1     095-1604 O-Ring Seal     Lubricate the bore and ring with the lubricant that is being sealed.    
5     1     9F-2247 Pipe Plug     Apply blue Loctite 242 to the threads.    
6     2     095-1600 O-Ring Seal     Lubricate the bore and ring with the lubricant that is being sealed.    
7     2     422-0849 Bushing     After assembly, bore is
40.15 0.08 mm (1.581 0.003 inch).    
8     1     415-5199 Shaft     Diameter is
39.936 to 39.975 mm (1.5723 to 1.5738 inch).    
9     1     415-5198 Idler and Bearing As     The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Prior to assembly, apply a thin film of oil to the contacting surfaces of the metal seal rings. The metal seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist.    
-     -     -     End play in axial direction :
Minimum is
0.15 mm (0.006 inch).
Maximum is
1.78 mm ( 0.070 inch).