BOOM AS-JIB 1341532 - Caterpillar

Illustration 1 g03614616
Illustration 2 g06091783The "Service" menu option is selected by using the four-way button until the "Service" menu is displayed and then pressing the OK button.The following options are available through the "Service" menu:
Configuration
Diagnostics
Calibrations
Service Test
ECM Summary
Service Mode (HRC only)Note: The default service password is 1234_. The fifth position "_", must be a blank space. To view or change the password, connect to Caterpillar Electronic Technician (Cat® ET) and navigate to the configurations section for the message display.Configuration
Illustration 3 g06091792The three configuration items require a password entry to configure. Password entry is required once per key cycle.Lockouts include:
Articulation
Blade Pitch
Blade Sideshift
Circle Sideshift
Wheel Lean
Blade Rotation Angle
Blade Rotation Limit
Blade Cushion
Centershift Pin PullerDiagnostics
Illustration 4 g03614678Cat® Electronic Technician (Cat ET) Service Tool is required to clear diagnostics.Calibrations
Calibrations available:
Transmission Fill
Slope Sensor
Blade Rotation Angle
Left Lift Valve
Right Lift ValveService Test
Service Tests available:
Dead Engine SteeringECM Summary
Illustration 5 g06092013A summary is available for the following ECMs:
Engine
Aftertreatment (HRC only)
Transmission
Implement
Implement 2
Implement 3 (Implement 3 hidden when not supported)
AWD
Product Link
DisplayService Mode (HRC only)
IOV Inactive
Illustration 6 g06102112IOV Active
Illustration 7 g06102116