BOOM & BEARING AS 4890374 - Caterpillar

Illustration 1 g03130498
Typical example
Table 1
Specification for 6I-4961 Flywheel Gp, 7E-8348 Flywheel Gp, 9Y-6182 Flywheel Gp, and 4P-9511 Flywheel Gp
Item Qty Part Number Specification Description
1 - - When the flywheel is installed, put the dash mark on the flywheel near the pilot bore in alignment with the dash mark on the crankshaft.
2 20 6V-5605 Bolt Use the following procedure to tighten the bolts:
Before assembly, lubricate the threads and bearing surface with Loctite C5A Copper Anti-Seize.
Torque to 800 80 N m (590 59 lb ft).
Tighten the bolts to an additional 90 degrees + 2 - 5 degrees.