5017433 BOOM GP Caterpillar parts
Rating:
Alternative (cross code) number:
CA5017433
501-7433
5017433
CA5017433
501-7433
5017433
Information:
General Information
Illustration 1 g01055227
Fuel system schematic (typical example)
The fuel supply circuit is a conventional design for engines that use fuel injectors. The fuel supply circuit uses a fuel transfer pump to deliver fuel from the fuel tank to the electronic fuel injectors. The transfer pump is a fixed displacement gear pump.The fuel flows through a fuel filter before entering the fuel supply manifold. A fuel priming pump is located on the fuel filter base in order to fill the system. The system must be primed after the filter changes. The system must be primed after draining the fuel supply and the return manifolds, when the fuel injectors are replaced.The fuel flows continuously from the fuel supply manifold through the fuel injectors. The fuel flows when either the supply or the fill port in the injector is not closed by the injector body assembly plunger. The fuel that is not injected into the cylinder is returned to the tank through the fuel return manifold.A pressure regulating valve is at the end of the fuel return manifold. The pressure regulating valve controls the entire fuel system pressure. This provides proper filling of the fuel injectors.The electronically controlled mechanically actuated fuel injector system provides total electronic control of injection timing. The injection timing is varied in order to optimize the engine's performance.The timing ring is part of the rear gear group. The engine speed/timing sensor monitors the timing ring for detection of crankshaft position and for engine speed. Other information and this data allows the ECM to correctly send a signal to the injector solenoids. The fuel injector's solenoid is energized in order to begin fuel injection. The fuel injector's solenoid is de-energized in order to end fuel injection. Refer to Systems Operation, "Fuel Injector".Secondary Fuel Filter
Different types of fuel filters are available for the engines.Element Filter
Illustration 2 g01055505
(1) Cover
(2) Plug
(3) Drain valve
(4) Drain Spin-on Type Filter
Illustration 3 g01055498
(5) Fuel filter base
(6) Spin-on type filter
(7) Front housing Duplex Fuel Filter
The duplex fuel filter system enables you to change the filter elements while the engine is running.
Illustration 4 g01055507
(8) Fill valve
(9) Control valve handle
Illustration 1 g01055227
Fuel system schematic (typical example)
The fuel supply circuit is a conventional design for engines that use fuel injectors. The fuel supply circuit uses a fuel transfer pump to deliver fuel from the fuel tank to the electronic fuel injectors. The transfer pump is a fixed displacement gear pump.The fuel flows through a fuel filter before entering the fuel supply manifold. A fuel priming pump is located on the fuel filter base in order to fill the system. The system must be primed after the filter changes. The system must be primed after draining the fuel supply and the return manifolds, when the fuel injectors are replaced.The fuel flows continuously from the fuel supply manifold through the fuel injectors. The fuel flows when either the supply or the fill port in the injector is not closed by the injector body assembly plunger. The fuel that is not injected into the cylinder is returned to the tank through the fuel return manifold.A pressure regulating valve is at the end of the fuel return manifold. The pressure regulating valve controls the entire fuel system pressure. This provides proper filling of the fuel injectors.The electronically controlled mechanically actuated fuel injector system provides total electronic control of injection timing. The injection timing is varied in order to optimize the engine's performance.The timing ring is part of the rear gear group. The engine speed/timing sensor monitors the timing ring for detection of crankshaft position and for engine speed. Other information and this data allows the ECM to correctly send a signal to the injector solenoids. The fuel injector's solenoid is energized in order to begin fuel injection. The fuel injector's solenoid is de-energized in order to end fuel injection. Refer to Systems Operation, "Fuel Injector".Secondary Fuel Filter
Different types of fuel filters are available for the engines.Element Filter
Illustration 2 g01055505
(1) Cover
(2) Plug
(3) Drain valve
(4) Drain Spin-on Type Filter
Illustration 3 g01055498
(5) Fuel filter base
(6) Spin-on type filter
(7) Front housing Duplex Fuel Filter
The duplex fuel filter system enables you to change the filter elements while the engine is running.
Illustration 4 g01055507
(8) Fill valve
(9) Control valve handle
Caterpillar SIS machinery equipment:
Caterpillar SIS
390F L Excavator FEH00001-UP (MACHINE) POWERED BY C18 Engine »
501-7433
BOOM GP
390F L Excavator MGF00001-UP (MACHINE) POWERED BY C18 Engine »
501-7433
BOOM GP
390F L Excavator HSM00001-UP (MACHINE) POWERED BY C18 Engine »
501-7433
BOOM GP
390F L Excavator TYE00001-UP (MACHINE) POWERED BY C18 Engine »
501-7433
BOOM GP
390F L Excavator GAY00001-UP (MACHINE) POWERED BY C18 Engine »
501-7433
BOOM GP
390F L Excavator HJD00001-UP (MACHINE) POWERED BY C18 Engine »
501-7433
BOOM GP
Caterpillar parts catalog:
Parts boom Caterpillar catalog:
4886383
BOOM GP
Caterpillar
Caterpillar
4866617
BOOM AR
Caterpillar
Caterpillar
4762825
BOOM & BEARING AS
Caterpillar
Caterpillar
4747540
BOOM AS
Caterpillar
Caterpillar
4623544
BOOM AR
Caterpillar
Caterpillar
4609850
BOOM AS
Caterpillar
Caterpillar
5214050
BOOM AS
Caterpillar
Caterpillar
5214049
BOOM GP
Caterpillar
Caterpillar
5119416
BOOM AR
Caterpillar
Caterpillar
5046348
BOOM AR-MASS
Caterpillar
Caterpillar
5017437
BOOM & BEARING AS
Caterpillar
Caterpillar
5017434
BOOM & BEARING AS
Caterpillar
Caterpillar