BOOT 2277571 - Caterpillar

Illustration 1 g03739721
Table 1
Specification for 265-5084 Ripper Cylinder Gp
Item Qty Part Specification Description
1 2 9T-0610 Bearing Bore before assembly is 76.525 0.020 mm (3.0128 0.0008 inch).
2 1 3J-9545 Locknut Before assembly, lubricate the threads.
Torque to 6500 380 N m (4794 280 lb ft).
A 1 265-5088 Rod As Diameter is 69.950 0.038 mm (2.7539 0.0015 inch).
B 1 265-5086 Hydraulic Cylinder Bore is 140.00 0.08 mm (5.512 0.003 inch).
3 1 264-0614 Head Bore of the head over four lands (C) is 70.33 0.03 mm (2.769 0.001 inch).
Before assembly, lubricate the threads with clean grease.
Torque to 600 130 N m (443 96 lb ft).
4 1 3G-5999 Bushing Bore before assembly is 76.525 0.020 mm (3.0128 0.0008 inch).
Installation depth is 11.0 0.5 mm (0.43 0.02 inch).
5 1 167-2235 Buffer Seal As Lubricate sealing lip lightly with the lubricant that is being sealed.
6 1 167-2299 U-Cup Seal Lubricate sealing lip lightly with the lubricant that is being sealed.
7 1 278-2324 Wiper Seal Lubricate sealing lip lightly with the lubricant that is being sealed.
8 - - Before assembly, apply green Loctite 648 to the wiper seal groove.