BOOT 2675225 - Caterpillar

Illustration 12 g01024140
Attach Tooling (B) and a suitable lifting device to control valve (30) .
Remove bolts (35) and the washers that secure control valve (30) to the transmission.
Remove control valve (30) from the transmission. The weight of control valve (30) is approximately 36 kg (80 lb).Removal Procedure (Out of Chassis)
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7573     Link Bracket     1    
Illustration 13 g00591181
Remove bolts (2) and washers from manifold (1). Remove manifold (1) .
Illustration 14 g00591182
Remove O-ring seals (3) from manifold (1) .
Illustration 15 g00591183
Remove nut (5) from harness assembly (4) .
Illustration 16 g00591185
Remove bolts (6) and washers that secure retainer (7) to the transmission case. Push harness assembly (4) through retainer (7). Remove retainer (7) from the transmission case.
Illustration 17 g00591186
Remove gasket (8) .
Illustration 18 g00591187
Remove bolts (9) that secure plate (10) to cover (11). Remove plate (10) from cover (11). Remove bolts (12) that secure cover (11) to case assembly (13). Remove cover (11) from case assembly (13) .
Illustration 19 g00591189
Remove cover gasket (14) from case assembly (13) .
Illustration 20 g00591196
Remove O-ring seal (15) from harness assembly (4) .
Illustration 21 g00591197
Remove locking bolt (18) and washer (17) from control valve (16) .
Illustration 22 g00591199
Remove bolt (19) from control valve (16). Remove sleeves (20) from control valve (16) .
Illustration 23 g00591200
Remove O-ring seals (21) from sleeve (20) .
Illustration 24 g01024183
Attach Tooling (A) and a suitable lifting device to control valve (16). Remove bolts (22) and the washers from control valve (16). Remove control valve (16) from case assembly (13). The weight of control valve (16) is approximately 36 kg (80 lb).