BOOT-ROD END 6V3294 - Caterpillar

Crushing or Cutting Prevention
Never attempt adjustments while the machine is moving or the engine is running unless otherwise specified.Support equipment and implements properly when working beneath them. Do not depend on hydraulic cylinders to hold it up. Any implement can fall if a control is moved, or a hydraulic line breaks.Where there are implement linkages, the clearance in the linkage area will increase or decrease with movement of the implement.Stay clear of all rotating and moving parts.Keep objects away from moving fan blades. They will throw or cut any object or tool that falls or is pushed into them.Do not use a kinked or frayed wire rope cable. Wear gloves when handling the wire rope cable.Retainer pins, when struck with force, can fly out and injure nearby persons.Wear protective glasses when striking a retainer pin to avoid injury to your eyes.Chips or other debris can fly off objects when struck. Make sure no one can be injured by flying debris before striking any object.Burn Prevention
At operating temperature, the engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot water or steam. Any contact can cause severe burns. Check the coolant level only after the engine has been stopped and the filler cap is cool enough to remove with your bare hand.Remove the cooling system filler cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes and do not drink, to prevent personal injury.Allow coolant system components to cool before draining.Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.At operating temperature, the hydraulic tank is hot and can be under pressure. Remove the hydraulic tank filler cap only after the engine has been stopped and the filler cap is cool enough to remove with your bare hand.Remove the hydraulic tank filler cap slowly to relieve pressure.Relieve all pressure in air, oil, fuel or cooling systems before any lines, fittings or related items are disconnected or removed. Battery electrolyte contains acid and can cause injury. Avoid contact with the skin and eyes.Fire or Explosion Prevention
All fuels, most lubricants and some coolant mixtures are flammable.Do not smoke while refueling or in a refueling area.Do not smoke in areas where batteries are charged, or where flammable materials are stored.When starting from an external source, always connect the positive (+) boost cable to the positive (+) terminal of the battery of the engine to be started.Attach the negative (-) boost ground cable last, away from the battery. See the "Operation" section of this guide for specific instructions.Clean and tighten all electrical connections. Check daily for loose or frayed electrical wires. Have all loose or frayed electrical wires tightened, repaired or replaced before operating the machine.Keep all fuels and lubricants stored in properly marked containers and away from all unauthorized persons.Store all oily rags or other flammable material in a protective container, in a safe place.Do not weld or