BOOT-SWITCH 7T6184 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-7505     Hydraulic Jack     1    Start By:
Remove the bottom radiator tank. Refer to Disassembly and Assembly, "Radiator Bottom Tank - Remove and Install".Note: The cooling package has been removed for clarity.Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Drain fuel into a suitable container for storage or disposal. The capacity of the cooling system is 210 L (55.5 US gal).
Illustration 1 g00970462
Remove clamp (4) .
Remove cap (5) .
Disconnect hose assemblies (1) and (2) .
Disconnect harness assembly (3) .
Illustration 2 g00970464
Use Tooling (A) to support fuel tank (7) .
Remove bolts (6) and remove fuel tank (7). The weight of fuel tank (7) is approximately 125 kg (275 lb).