BOOT 9X4519 - Caterpillar

Table 1
Required Tools    
Tooling    Item    Part
Number    Description    Qty    
A     A1     8T-0855     Pressure Gauge
4000 kPa (580 psi)     1    
A2 6V-3989     Fitting     1    
A3 6V-4143     Coupler     2    
A4 177-7861     Hose As
41370 kPa (6000 psi)     1    
B     B1     8T-0862     Pressure Gauge
500 kPa (72 psi)     1    
B2 8T-0860     Pressure Gauge
40000 kPa (5800 psi)     1    
B3 8T-0855     Pressure Gauge
4000 kPa (580 psi)     1    
B4 6V-3081     Hose As
41500 kPa (6020 psi)     1    
B5 4S-6399     Connector     1    
B6 6V-4144     Coupler     1    Test Procedure
Table 2
Checklist for Transmission Clutch Pressures    
Transmission Speed    Transmission Clutch    Pressure Measurement    Transmission Clutch    Pressure Measurement    
FIRST SPEED FORWARD     No. 2 Clutch         No. 5 Clutch        
SECOND SPEED FORWARD     No. 2 Clutch         No. 4 Clutch        
THIRD SPEED FORWARD     No. 2 Clutch         No. 3 Clutch        
NEUTRAL     No. 3 Clutch         N/A        
FIRST SPEED REVERSE     No. 1 Clutch         No. 5 Clutch        
SECOND SPEED REVERSE     No. 1 Clutch         No. 4 Clutch        
THIRD SPEED REVERSE     No. 1 Clutch         No. 3 Clutch        
Table 3
Transmission Speed     Clutches That are Engaged In The Transmission    
First Speed Forward     2 and 5    
Second Speed Forward     2 and 4    
Third Speed Forward     2 and 3    
Neutral     3    
First Speed Reverse     1 and 5    
Second Speed Reverse     1 and 4    
Third Speed Reverse     1 and 3    
Illustration 3 g01234756
(4) Pressure Tap "CL4" ( second gear ) (5) Pressure Tap "CL5" ( first gear ) (3) Pressure Tap "CL3" ( third gear ) (2) Pressure Tap "CL2" ( forward ) (1) Pressure Tap "CL1" ( reverse )
Move the machine to a smooth horizontal location.
Attach one set of tooling (A or B) to pressure tap (2) and one set of tooling (A or B) to pressure tap (5) . Pressure tap (2) is for No. 2 Clutch (FORWARD). Pressure tap (5) is for No. 5 Clutch (FIRST SPEED).
Run the hydraulic hoses from tooling (A or B) into the cab.
Start the engine.
Warm the power train oil to a minimum temperature of 84° 8°C (183° 14°F).
Operate the engine at LOW IDLE.
Engage the service brake.
Disengage the parking brake.
Place the transmission in the FIRST SPEED FORWARD position.
Check the pressure at tooling (A) for the No. 2