BOSS GP-FRAME 3413192 - Caterpillar

General Operating Restrictions
Use the machine only in environments that do not contain explosive gases.
Table 1
785C Operating Restrictions Grade
Parking Brake Holding Capability(1) 15%
Maximum Side Grade Operation (Except Dumping/Spreading)(2) 15%
Maximum Side Grade for Dumping/Spreading(3) 0%
Maximum Negative Grade (uphill) for Dumping/Spreading(4) 0%
(1) The listed restriction assumes that the brake components are within working specifications, the machine mass is at maximum allowable, a graded ground surface, and a dry, firm underfoot. The machine operator is responsible for evaluating the condition of the machine, the environment, and use appropriate judgment to maintain control of the machine.
(2) Operating on a side grade is not recommended. The listed restriction assumes a machine operating perpendicular to a side grade, graded ground surface, nominal payload, homogeneous payload distribution in the bowl, and operating on dry, firm underfoot. Refer to Operation and Maintenance Manual, "Slope Operation" for more information.
(3) Dumping on a side grade is not recommended. The center of gravity of the machine changes very rapidly during dumping on a side grade.
(4) Trucks are designed to dump on level ground with some variation in underfoot surface conditions. Dumping while machine is on a negative grade is not recommended because under some conditions, variations in payload densities and payload discharge characteristics could result in the front wheels lifting off the ground.784C
Dimensions
Illustration 2 g01033350
Approximate dimensions are shown. The dimensions will vary depending on the configuration and the options.
(D) 6.65 m (21.82 ft)
(E) 5.80 m (19.03 ft)
(F) 9.34 m (30.64 ft)Weights
The target gross machine operating weight is listed under "Application/Configuration Restrictions" (see below).The empty machine weight of the 784C will depend on the configuration of the machine. Weigh the empty machine to get an accurate weight. If a suitable scale is not available, contact your local Caterpillar dealer for an approximate weight of the machine, as equipped when shipped from the factory. This weight will not include additional equipment or options that have been installed on the machine after leaving the factory.The target payload depends on the machine configuration. To calculate the target payload, subtract empty machine weight from the target gross machine operating weight.The Caterpillar payload overload policy, referred to as the 10/10/20 Overload Policy, states that no more than 10% of payloads may exceed 110% of the target payload, and no single payload shall ever exceed 120% of the maximum target payload.If this machine has a "CE" plate that is required for the European Union, the weight on the "CE" plate is based on the following:
Empty machine weight
Full tank of fuel
75 kg (165 lb) operatorIntended Use
The 784C Off-Highway Tractor is a partial self-propelled wheeled machine with a rigid frame and wheel steering. The base 784C as supplied by Caterpillar requires additional mounting of equipment or machinery to determine the final function and industry classification. Additional operation and maintenance instructions and certifications may be required to cover the additional mounted equipment or machinery.When equipped with the attachment “Yoke Type Hitch” it isintended to been classified as derivative earth-moving machinery used for towing water wagons, bottom-dump wagons, and side-dump wagons. Basic earth-moving machinery types are