BOSS 9R3761 - Caterpillar

Illustration 1 g03825878
(1) The two bolts are marked with an X. Torque the bolts to ... 270 40 N m (200 30 lb ft) (2) 6Y-6328 Shim Pack Thickness of the shim pack ... 1.85 mm (0.073 inch) Use as required to obtain an end play for gear (5) of ... 0.05 0.03 mm (0.0020 0.0012 inch) (3) Torque the eighteen bolts to ... 270 40 N m (200 30 lb ft) (4) Torque the eight bolts to ... 135 20 N m (100 15 lb ft) (5) O-Ring SealLubricate the bore lightly with the lubricant that is being sealed. (6) 6Y-6329 Shim Pack Thickness of the shim pack ... 1.85 mm (0.073 inch) Use as required to obtain an end play for gear (8) of ... 0.05 + 0.05 - 0.03 mm (0.002 + 0.002 - 0.001 inch) (7) Torque the eight bolts to ... 55 10 N m (41 7 lb ft) (8) Torque the seven bolts to ... 135 20 N m (100 15 lb ft) (9) Torque the two bolts to ... 475 60 N m (350 44 lb ft) (10) (11) O-ring sealLubricate the bore lightly with the lubricant that is being sealed. (12) Apply Loctite 592 to the lip seal prior to installation. (13) Lubricate the lip seal lip lightly with the lubricant that is being sealed.
Illustration 2 g03825880
(14) Remove all oil and grease from the mating surface. Apply a continuous bead of Loctite Hi-Temp Flange Sealant or spread sealant with a roller. Apply to a thickness of ... 3.0 0.5 mm (0.12 0.02 inch)Note: Remove excess sealant that spills over the edge. (15) Speed Sensor Gp Torque the two locknuts to ... 25 5 N m (18 4 lb ft) (16) Torque the sixteen bolts to ... 135 20 N m (100 15 lb ft) (17) Torque the three bolts that are marked with a Y, to ... 135 20 N m (100 15 lb ft) (18) Torque the drain plug to ... 68 7 N m (50 5 lb ft)