BOWL 1M7250 - Caterpillar

System configuration parameters are parameters that affect the emissions and the power of the engine. Default values for the parameters are programmed at the factory. Some parameters may be changed by the customer in order to suit the needs of the specific application.Engine Rating Parameter
"Rating Number"
The "Rating Number" corresponds to the selected set of performance maps for the application. Factory passwords are required in order to change the "Rating Number".ECM Identification Parameter
Equipment ID
"Equipment ID" is the identification of the equipment that is assigned by the customer. This parameter allows the customer to enter a description into the ECM in order to identify the engines application. A maximum of 17 characters can be entered in the field.Miscellaneous
Monitoring Mode Shutdowns
"Monitoring Mode Shutdowns" controls the shutdown feature that is associated with the engine monitoring feature.Configurable Inputs
Overspeed Protection
The "Overspeed Protection" speed is the engine rpm when a shutdown will occur. Overspeed protection is used in order to protect the engine from damage. Overspeed protection must be enabled in "Monitoring Mode Shudowns".Configurable Governor Droop
"Configurable Governor Droop" allows the engine to run in "droop mode" when the genset is operated in parallel with other gensets.Coolant Level Sensor
If this parameter is programmed to "Enabled" and the coolant level falls below the measured level, "E2143-3" event code will be displayed.User Defined Switch Installation Status
A user-defined shutdown switch is an optional switch input. If this parameter is programmed to "Enabled" and the user-defined shutdown switch closes, the engine will shut down.