BOX AS 2047552 - Caterpillar

2047552 BOX AS Caterpillar parts 938G II, IT38G II

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2047552
204-7552
2047552

Weight: 28 pounds 12 kg.

Buy BOX AS 2047552 Caterpillar genuine, new aftermarket tractor parts with delivery
INTEGRATED TOOLCARRIER, WHEEL LOADER,

Compatible equipment models: 2047552:

INTEGRATED TOOLCARRIER IT38G II

WHEEL LOADER 938G II Caterpillar

Number on catalog scheme: 11

For full view, you need register

Information:

Illustration 8 g01675954
(19) 303-6441 Mast As (20) 198-4780 Hard Washers (21) 7X-2555 Bolts
Install the 303-6441 Mast As (19) with four 198-4780 Hard Washers (20) and four 7X-2555 Bolts (21) .Note: Ensure that the mast is oriented so that the mast is slightly rearward.Install the Contents of the 296-3336 Grade Control Wiring Gp
Illustration 9 g01676257
(22) 263-6699 Connector Flange (23) 6V-9669 Screws (24) 096-5962 Hard Washers
Illustration 10 g01687035
(25) Notch
Install the 263-6699 Connector Flange (22) with four 6V-9669 Screws (23) and four 096-5962 Hard Washers (24). The shell is used in order to secure the harness when the harness is not connected to the receiver.Note: Ensure that the notch on the 263-6699 Connector Flange is in the up position. Refer to Illustration 10.
Illustration 11 g01676416
(30) 288-5508 Bracket As (31) 6D-3033 Socket Head Screws (32) 5P-1076 Hard Washers (33) 8T-4192 Bolts (34) 4P-7428 Clip
Install the 288-5508 Bracket As (30) with the 5P-1076 Hard Washers (32) and 8T-4192 Bolts (33). Install a 4P-7428 Clip (34) under the bolt. Refer to Illustration 11.
Illustration 12 g01676768
(35) 304-7051 Plate As (36) 8T-4137 Bolts (37) 8T-4121 Hard Washers (38) 4P-8134 Clip (39) 130-5300 Clip
Install the 304-7051 Plate As (35) with the two 8T-4137 Bolts (36) and two 8T-4121 Hard Washers (37). Install the 4P-8134 Clip (38) and 130-5300 Clip (39). Refer to Illustration 12.Note: Mount the angle sensor on the 304-7051 Plate As .
Illustration 13 g01676553
Routing of the 295-6880 Control Harness As
Install the 295-6880 Control Harness As . Use the 7K-1181 Cable Straps in order to secure the harness to the weld links. Refer to Illustration 13.Note: Ensure that the end of the harness with two connectors is located next to the 304-7051 Plate As (35) .
Illustration 14 g01687234
(40) 2T-3019 Clip (41) 8T-4137 Bolt (42) 8T-4121 Hard Washer
Install the 2T-3019 Clip (40) with the 8T-4137 Bolt (41) and 8T-4121 Hard Washer (42). Refer to Illustration 14.Refer to Special Instruction, REHS2982, "Installation of the AccuGrade - CD700 Grade Control System for the G-Series Wheel Tractor Scrapers" in order to install the electronic components.