AVSPARE.COM
parts catalog

BOX 3236349 - Caterpillar



3236349 BOX Caterpillar parts CD-54 BOX
Rating:
53
Alternative (cross code) number:
CA3236349
323-6349
3236349
Caterpillar 3236349 BOX
Weight: 0.37 pounds 0 kg.

Buy BOX 3236349 Caterpillar genuine, new aftermarket tractor parts with delivery
VIBRATORY COMPACTOR,

Compatible equipment models: 3236349:

VIBRATORY COMPACTOR  CD-54   Caterpillar
Number on catalog scheme: 62
 
  For full view, you need register

Information:

Test Procedure
Note: A temporary setting of the right forward travel crossover relief is required before the temporary setting of the main relief.Note: A temporary setting of the main relief valve is required before any crossover relief valves can be adjusted. Refer to Table 3 for temporary main relief setting for the function being tested.Note: A continuous relief of the valve for more than 10 seconds is not allowed.
Table 3
Function Temporary Main Relief Setting
Left Travel Forward and Reverse 37500 1500 kPa (5439 + 218 psi)
Right Travel Forward and Reverse
Table 4
Relief Valve Pressure Change With One Turn Of Adjustment Screw
Main relief valve 4430 kPa (650 psi)
Crossover relief valves 4230 kPa (625 psi) Note: Pressure values in Table 4 are approximate values. Use a pressure gauge for adjustment.
Illustration 4 g02791539
Travel brake valve (left side)
(5) Locknut
(6) Adjustment screw
(7) Crossover relief valve (forward left travel)
(8) Crossover relief valve (reverse left travel)
(9) Locknut
(10) Adjustment screw
Mark the original position of the right forward travel crossover relief valve.
Loosen the locknut for the right forward travel crossover relief valve. Turn the adjustment screw clockwise by one half turn. Tighten the locknut.
Illustration 5 g03328754
(D) Track block
(3) Sprocket
Place track block (D) in sprocket (3) to block forward right travel.
Start the engine.
Place the hydraulic activation control lever in the UNLOCKED position.
Place the machine controls at the following settings: engine speed dial "10" and AEC switch OFF. Refer to Testing and Adjusting, "Engine Performance - Test (Engine Speed)" for engine rpm settings.
Increase the hydraulic oil temperature to 55° 5°C (131° 9°F).
Slowly move the right travel control lever to full FORWARD position.
Check the main relief valve pressure setting at pressure tap (1) or pressure tap (2). The main relief valve pressure setting should be 35000 500 kPa (5076 73 psi).
Illustration 6 g02561037
Main relief valve (standard)
(A) Adjustment screw
(L) Locknut
Loosen the locknut. Set the temporary main relief pressure to 37500 500 kPa (5438 73 psi). Tighten the locknut.Note: Turn the adjustment screw clockwise to increase the pressure. Turn the adjustment screw counterclockwise to decrease the pressure.Note: Always make final pressure adjustments on pressure rise.
Illustration 7 g03261818
Sprocket (left travel)
(D) Track block
(4) Sprocket
Place track block (D) in sprocket (4) to block forward left travel.
Slowly move the left travel control lever to full FORWARD position.
Check the pressure setting of the left forward travel crossover relief.
Loosen the locknut of the left forward travel crossover relief valve. Turn adjustment screw of the left forward travel crossover relief valve until the pressure reading at pressure tap (2) is 35000 kPa (5076 psi).
Slowly move the left travel control lever to full FORWARD position.
Check the pressure setting of the left forward travel crossover relief.
Loosen the locknut of the left forward travel crossover relief valve. Turn adjustment screw of the left forward travel crossover relief valve until the pressure reading at pressure tap (2) is 37500 kPa (5439 psi).Note: Turn the adjustment screw clockwise to increase the pressure. Turn the adjustment screw counterclockwise to decrease the pressure.Note: To prevent over setting, the adjustment should be stopped immediately

Caterpillar parts catalog:

Caterpillar parts catalog
CD54 Vibratory Compactor J5R00001-UP (MACHINE) POWERED BY 3054C Engine


Parts box Caterpillar catalog:

2793556 BOX AS
AS2252C, AS2302C, AS3251C, AS3301C
3494773 BOX AS
AS2252C, AS2302C, AS3251C, AS3301C
3786614 BOX AS
AP-600D, AP-655D, AS4252C
2967912 BOX AS
AP-600D, AP-655D, AP555E, AS4251C
3531561 BOX AS-RELAY
AP-600D, AP-655D, AP555E, AS4251C
3125029 BOX AS-RELAY
AP-600D, AP-655D, AS4251C
0828124 BOX
CB-521, CB-525B, PS-500
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.