AVSPARE.COM
parts catalog

BOX GP-SERVICE CENTER 3967014 - Caterpillar



3967014 BOX GP-SERVICE CENTER Caterpillar parts 966H, 972H BOX
Rating:
74
Alternative (cross code) number:
CA3967014
396-7014
3967014
Caterpillar 3967014 BOX GP-SERVICE CENTER

Buy BOX GP-SERVICE CENTER 3967014 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 3967014:

WHEEL LOADER  966H   972H   Caterpillar
Number on catalog scheme: 1
 
  For full view, you need register
3967014 Images:
Caterpillar parts 3967014
Caterpillar parts 3967014
Caterpillar parts 3967014

Information:


Illustration 18 g01526997
Do not exceed 3792 kPa (550 psi). Damage to the service brake can occur.
Attach Tooling (C) onto block (4) . Use Tooling (C) in order to release the parking brakes.
Illustration 19 g01526933
Illustration 20 g01526938
Use a suitable lifting device in order to install drive chain (14) . The weight of drive chain (14) is approximately 136 kg (300 lb). Turn the sprocket that is on the service brake and the sprocket that is on the final drive simultaneously until chain (14) is in position on the sprockets. Install suitable pry bars in order to retain drive chain (14) .
Illustration 21 g01527009
Install Tooling (B) onto drive chain (14) . Remove two pry bars.
Illustration 22 g01527007
Install master link (11) . Remove Tooling (B) .
Illustration 23 g01527005
Illustration 24 g01527003
Note: Insert the connector links so that the spring pin ends are toward the other chain. Links should not be in adjacent sprocket tooth spaces when passing on center sprockets or interference may result.
Install link plate (13) . Install spring pins (12) in order to connect master link (11) .
Illustration 25 g01526999
Install gasket (10) and cover (9) . Install bolts (8) . Install gasket (7) and cover (6) . Install bolts (5) .
Illustration 26 g03368306
(X) Purge plugs for the service brake (S) Service Brake (P) Parking and secondary brake
Tighten purge plug (X) that was loosened in Step 1.
Illustration 27 g01526997
Failure to release the pressure can result in personal injury.
Release the pressure from Tooling (C) . Disconnect Tooling (A) from block (4) .
Illustration 28 g01526995
Connect hose assembly (3) and hose assembly (2) .
Illustration 29 g01526993
Use two people in order to Install walkway assembly (1) . The weight of walkway assembly (1) is approximately 45 kg (100 lb).
Illustration 30 g01526981
Use Tooling (A) in order to lower the rear of the machine until the rear wheels are on the ground.
Repeat this procedure for the remaining drive chains.End By: Install the axle shaft. Refer to Disassembly and Assembly, "Axle Shaft - Remove and Install".

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
966H Wheel Loader RYF00001-UP (MACHINE) POWERED BY C11 Engine
972H Wheel Loader LCC00001-UP (MACHINE) POWERED BY C13 Engine
966H Wheel Loader BJ600001-UP (MACHINE) POWERED BY C11 Engine
972H Wheel Loader WXZ00001-UP (MACHINE) POWERED BY C13 Engine
966H Wheel Loader BS600001-UP (MACHINE) POWERED BY C11 Engine
972H Wheel Loader NPE00001-UP (MACHINE) POWERED BY C13 Engine


Parts box Caterpillar catalog:

3010038 BOX AS
950H, 962H, 966H, 972H, 980H, 988H, IT62H
1350378 BOX AS
950G II, 950H, 962G II, 962H, 966G II, 966H, 972G II, 972H, 980H
4222321 BOX GP-EXTENSION TERMINAL
3512, 3512B, 3512C, 3516, 3516B, 3516C, C175-16, C27
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.