BRACE AS 6I8087 - Caterpillar

Connection Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8S-7610     Base As     1    
8S-7650 Cylinder As     1    
3S-6224 Electric Hydraulic Pump Gp     1    
B     8S-7640     Stand     1    
8S-7611 Tube     1    
8S-7615 Pin     1    
C     4C-5593     Anti-Seize Compound     1    
If the track was removed from the machine, support the machine with Tooling (B) and install the track. Use Tooling (A) to lower the appropriate side of the machine. The weight of the track is approximately 758 kg (1670 lb).
Illustration 1 g00951298
Install a chain through the track link. Attach a suitable lifting device onto the chain. Position the track onto the final drive sprocket. Turn the final drive in the reverse direction and permit the track to walk backward onto the final drive.
Illustration 2 g00951012
Position master shoe (4) . Apply Tooling (C) onto bolts (6) and install bolts (6) . Tighten bolts (6) to a torque of 170 40 N m (125 30 lb ft). Tighten the bolts 120 degree 5 degree.
Tighten the track. Refer to the Operation and Maintenance Manual, "Track - Check/Adjust".