BRACE AS 6V3155 - Caterpillar

Illustration 1 g01107725
Location of steering neutralizer valves
Illustration 2 g00118089
Steering neutralizer valve in the CLOSED Position
(1) Stem. (2) Inlet port. (3) Outlet port. (4) Tank port. (5) Spring.
The steering neutralizer valves block the flow of pilot oil to the steering control valve. This causes the machine to stop articulating at the end of a complete turn. This occurs just before the front of the machine contacts the frame.A left turn stop is used for the steering neutralizer valve for a left turn, and a right turn stop is used for the steering neutralizer valve for a right turn. Both the left turn stop and the right turn stop are mounted on the front of the frame. Both of the neutralizer valves are mounted on the rear frame. Both the right neutralizer valve and the left neutralizer valve are identical. Additionally, both the right turn stop and the left turn stop are identical.Pilot oil flows from the steering pilot valve to either the right neutralizer valve or to the left neutralizer valve. This happens before the oil flows to the steering control valve. Oil flows from the steering pilot valve into the neutralizer valve through inlet port (2).Spring (5) holds stem (1) to the left. Oil flows past stem (1) and through outlet port (3). The oil then flows to the steering control valve.When the machine is turned to the far right, the right turn stop contacts stem (1) of the right neutralizer valve. This should only occur when the STIC steering control lever (if equipped), or the steering wheel (if equipped) is moved to the full RIGHT TURN position and spring (5) is compressed.As the stem moves right, the stem blocks the flow of oil through port (2). Because pilot oil can not flow from port (2) to port (3), no pilot oil can flow to the control valve. Pilot oil at port (3) is allowed to flow to the tank through tank port (4).When the flow of pilot oil stops acting on the spool valve in the steering control valve, the spool valve returns to the NEUTRAL position. This causes the steering action to stop.As the machine moves to the left, the right turn stop will move away from stem (1). The force of spring (5) acts against stem (1). This causes the stem to move left. As the stem moves left by a small amount, the stem opens port (2). This allows pilot oil to flow past the stem and through port (3).The left neutralizer valve operates in the same manner as the right neutralizer valve.