AVSPARE.COM
parts catalog

BRACKET A 0544722 - Caterpillar



0544722 BRACKET A Caterpillar parts BRACKET
Rating:
41
Alternative (cross code) number:
CA0544722
054-4722
0544722
Caterpillar 0544722 BRACKET A
Weight: 65 pounds 29 kg.

Buy BRACKET A 0544722 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Image1.10.1
11. Remove two bolts, two washers, two rubber cushions, and two bosses from the radiator group.
Image1.11.1
12. Move the shroud 50mm forward to the engine.
Image1.12.1
13. Remove the existing radiator core from the radiator group. Make sure the two rubber cushions keep in place on the bosses. Refer to Image 1.13.2.
Image1.13.1
Image1.13.2
14. Attach the 265-3632 Seal to the new 326-3870 Radiator Core Assembly.
Image1.14.1
15. Install the new 326-3870 Radiator Core Assembly to the radiator group.
Image1.15.1
16. Use the eight bolts and washers that were removed in Step 10 in order to assemble the shroud to the radiator group. Tighten the bolts to a torque of 28+/-7 Nm.
17. Use the two bolts, two washers, two rubber cushions, and two bosses that were removed in Step 11 in order to connect the new 326-3870 Radiator Core Assembly to the radiator group. Tighten the bolts to a torque of 55+/-10 Nm.
18. Use the nine bolts and washers that were removed in Step 9 in order to assemble the upper and lower guard to the radiator group. Tighten the bolts to a torque of 55+/-10 Nm.
19. Assemble the water hose that was removed in Step 6.
20. Assemble the upper hose that was removed in Step 5 to the new 326-3870 Radiator Core Assembly. Use the band clamp that was removed in Step 5 in order to attach the upper hose. Tighten the screw of the band clamp to a torque of 4.5+/-0.5 Nm.
21. Use the bolt and washer that was removed in Step 4 in order to attach the hose. Tighten the bolt to a torque of 55+/-10 Nm.
22. Use the band clamp that was removed in Step 3 in order to assemble the lower hose to the new 326-3870 Radiator Core Assembly. Tighten the screw of the band clamp to a torque of 4.5+/-0.5 Nm.
23. Assemble the water hose and the drain valve that were removed in Step 2 to the new 326-3870 Radiator Core Assembly. Tighten the drain valve by hand. Close the drain valve.
24. Fill the radiator/cooling system using the "CAT ELC(50/50 Premix)". Refer to your machines Operation and Maintenance Manual.
25. Start the engine. Operate the engine without the pressure cap assembly until the water temperature regulator opens and the coolant level stabilizes. Maintain the coolant level and confirm water leakage from cooling system. Refer to your machines "Operation and Maintenance Manual".
26. Install the pressure cap assembly that was removed in Step 2.
27. Use the bolts of the hood support that were removed in Step 8 in order to close the engine hood group. Tighten the bolts to a torque of 100+/-20 Nm.
28. Use the bolts that were removed in Step 3 in order to assemble the access cover. Tighten the bolts to a torque of 100+/-20 Nm.


Parts bracket Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.