BRACKET 0871379 - Caterpillar

Inducement Strategy for DEF Level
Illustration 1 g03661613The DEF level percentage is shown on the performance page of the monitoring system. For more information refer to Operation and Maintenance Manual, "Monitoring System".
Illustration 2 g03661660If the DEF level falls below 20%, an amber indicator will illuminate next to the DEF level gauge on the display. To avoid further inducements, turn the key to the OFF position and add DEF to the DEF tank.
Illustration 3 g03661630If the DEF level falls below 13.5%, a level 1 inducement event will occur. The check engine lamp and the emissions malfunction indicator lamp will illuminate. The amber indicator next to the DEF level gauge on the display will continue to remain lit.
Illustration 4 g03661648If the DEF level is below 7.5%, a level 2 inducement event will occur. The check engine lamp and the emissions malfunction indicator lamp will illuminate and a flashing action indicator will also illuminate. The amber indicator next to the DEF level gauge on the display will remain lit. If the ECM is configured to "Reduced Performance" and the DEF level has reached 1%, the machine will be limited to 75% torque.
Illustration 5 g03661649 If the ECM is configured to "Reduced Performance" and the DEF tank has been emptied of all DEF, the engine will be in a level 3 final inducement. If the ECM is configured to "Reduced Time" and the DEF level is 3%, the engine will be in a level 3 final inducement. Prior to final inducement the check engine lamp and the emissions malfunction indicator lamp will illuminate, the flashing action indicator will illuminate, and an audible alarm will sound 20 seconds prior to the final inducement. The engine will be taken to low idle or will be shut down. Once shut down, the engine can be restarted for 5 minute periods at reduced speed and torque. If set to idle, the engine will idle indefinitely at reduced torque. The amber indicator next to the DEF level gauge on the display will remain lit.Note: Turn the key to the OFF position and add DEF to the DEF tank to reset the DEF level inducement.Inducement Strategy for DEF Quality, Tampering, SCR System Fault, and Impeded EGR
Illustration 6 g03623190The emissions malfunction indicator lamp will illuminate for a fault resulting from poor DEF quality, SCR system tampering, SCR system fault, or an EGR system fault. If the fault is the result of poor DEF quality, SCR system tampering, or SCR system fault, a first occurrence will result in a level 1 inducement for a duration of 2.5 hours. The level 1 inducement will also illuminate the check engine lamp. Repeat occurrences will result in a level 1 inducement duration of 5 minutes. If the fault is the result of an EGR system fault, a first occurrence will result in a level 1 inducement for a duration of 35 hours. Repeat occurrences will result in a level 1 inducement duration of 48 minutes.
Illustration 7 g03623191If a fault condition exists for the entire duration of inducement level 1, the strategy