AVSPARE.COM
parts catalog

BRACKET A 0878370 - Caterpillar



0878370 BRACKET A Caterpillar parts BRACKET
Rating:
71
Alternative (cross code) number:
CA0878370
087-8370
0878370
Caterpillar 0878370 BRACKET A

Buy BRACKET A 0878370 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 3 g03712047
Touch "Calibrations" (3).
Illustration 4 g03712054
Use soft key (6) next to the down arrow and soft key (5) next to the up arrow to scroll through the menu.
Touch "L Extender Extend Solenoid" (4) or "R Extender Extend Solenoid" (7). Note: The following steps describe the procedure used to calibrate the left extender extend solenoid. The procedure for calibrating the right extender extend solenoid is similar.
Illustration 5 g03712060
Read the on-screen warnings (8). Use soft key (6) next to the down arrow in order to scroll through the warnings.
Illustration 6 g03712072
After fulfilling the requirements of on-screen warnings (8), press soft key (9) next to "OK".
Illustration 7 g03712082
Press soft key (9) next to "OK".
Illustration 8 g03712089
Follow setup instructions (10). Use soft key (6) next to the down arrow in order to scroll through the machine setup.
Illustration 9 g03712094
When setup instructions (10) are met, press soft key (11) next to the next icon.
Illustration 10 g03712348
Place proportional extender switch (12) in the NEUTRAL position.
Illustration 11 g03712358
Press soft key (11) next to the next icon.
Illustration 12 g03712348
Use proportional extender switch (12) to place the left extender in the EXTEND position.
Illustration 13 g03712376
When the left extender is in the FULL EXTEND position. Hold in the FULL EXTEND position. Press soft key (11) next to the next icon.
Illustration 14 g03712388
When the left extender starts to move, immediately press soft key (11) next to the next icon.
Illustration 15 g03712348
Place proportional extender switch (12) in the NEUTRAL position.
Illustration 16 g03712358
Press soft key (11) next to the next icon.
Illustration 17 g03712422
The display should now read "Calibration Complete". Press soft key (9) next to "OK".


Parts bracket Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.