BRACKET 0974246 - Caterpillar

Release the parking brake by pushing parking brake control (1) toward the operator. This position electronically unlocks the parking brake, steering lever (2), and direction control (3). Note: When the parking brake is set, the power train defaults to neutral. When the parking brake is released, the direction control must be in NEUTRAL. Otherwise, the parking brake must be reset. In order to select a machine speed, return the direction control to neutral. Then, select a desired direction. Then, select the desired machine speed.
Move direction control (3) to the desired direction. Use thumb wheel (4) to select the desired machine speed.
Illustration 2 g01415902
Release travel control pedal (5) in order to allow the machine to move. Engine Speed Control (7)
Engine speed control (7) controls the engine speed.
Illustration 3 g03701403
(6) Bidirectional control
(7) Engine speed control
Low Idle - Rotate the engine speed control (7) counterclockwise in order to lower the idle speed.
High Idle - Rotate the engine speed control (7) clockwise in order to increase the idle speed. For high idle, rotate the engine speed control to highest position . The engine speed immediately moves to high idle. Your machine has a high idle engine speed of 1800 rpm.
Intermediate Speeds - Place engine speed control (7) into a middle position to allow the machine to regulate the idle speed at that setting automatically.The engine speed control has two functions.
Set the desired engine speed.
Set the default, forward tractor speed.Engine speed control (7) has seven speed positions.
Illustration 4 g03696711
Table 1
Speed Position Engine RPM Percentage Value(1) Speed Display
1 800(2)(3) 35 1.2
2 1150 42 2.0
3 1300 65 2.5
4 1550 77 2.8
5(4) 1550/1800(5) 100 3.0
6(6) 1550/1800(7) 100 3.0
7 1800(8) 100 3.0
(1) Available drawbar power
(2) Low Idle
(3) When the FNR is in forward or reverse or Steering is not equal to 0, the desired engine speed is 1050 rpm with the parking brake in the OFF position.
(4) Position 5 is “Fuel Economy Mode, Forward and Reverse”
(5) 1550 rpm for Neutral/Park and part load conditions in Reverse and Forward. 1800 rpm for shifting and full load conditions.
(6) Fuel Economy Mode, Reverse only
(7) 1550 rpm for Neutral/Park and part load conditions in Reverse. 1800 rpm for full load conditions.
(8) High Idle
To select high idle, rotate engine speed control (7) clockwise and release in the highest detent. To select low idle, rotate the engine speed control (7) counterclockwise to the first detent and release. Select an intermediate speed in the following manner:
Select the desired engine speed with engine speed control (7). Rotate the control clockwise into a middle detent position and release.
To return to high idle from an intermediate engine speed, rotate engine speed control (7) clockwise and release into the higher detent position.
To return to low idle from an intermediate speed, rotate engine speed control (7) counterclockwise and release into the lower detent position.
Use Position 5 of the engine speed control for machine operation in the Fuel Economy Mode. See “Operator Controls” for additional information on Fuel Economy Mode.
Use steering lever (2) in order to turn the machine.
Drive the machine forward for best visibility and for control. Changing Direction and