BRACKET AS 1033587 - Caterpillar

Remove four bolts (4) and washers.
Remove plate (5) from the lift arm assembly.
Illustration 4 g00674810
Disconnect lines (6), (7), and (8) .
Illustration 5 g00674814
Remove nuts (9), (10), and (11) .
Illustration 6 g00674874
Remove two bolts (12) and washers.
Illustration 7 g00674887
Remove rubber mounting (13) .
Remove tubes (14), (15), and (16) .
Illustration 8 g00675407
Remove two bolts (17) and washers.
Remove two clips (18) .
Illustration 9 g00675452
Disconnect lines (19) and (20) from the left lift arm assembly.
Illustration 10 g00675468
Disconnect lines (21) and (22) from the right lift arm assembly.
Illustration 11 g00675473
Remove two bolts (26) and hard washers (25) .
Remove tubes (23) and (24) from the right lift arm assembly.
Repeat Step 16 and Step 17 for the opposite side.
Illustration 12 g00690695
Remove snap ring (27) .
Illustration 13 g00690698
Remove pin (28) from the cylinder and lower cylinder (29) on the machine.
Repeat Step 19 and Step 20 for the opposite side.
Illustration 14 g00675492
Remove two bolts (32) and clips (31) .
Remove lines (30) from the underside of the lift arm assembly.
Illustration 15 g00692633
Lower cab (33) .
Illustration 16 g00675501
Use a suitable lifting device to support the lift arms.
Remove bolt (34) and pin assembly (35) from both sides of the lift arm assembly.
Illustration 17 g00675540
Remove lift arm assembly (36) with a suitable lifting device. Weight of the lift arm assembly is 310 kg (683 lb).