BRACKET 1070568 - Caterpillar

Connect cable assembly (25).
Illustration 56 g01723875
Connect hose assembly (24).
Illustration 57 g01723893
Illustration 58 g01723899
Install clamps (23). Connect hose assembly (22). Connect hose assembly (21).
Illustration 59 g01723354
Install clamps (20).
Illustration 60 g01723813
Connect hose assembly (19).
Illustration 61 g01723793
Connect hose assembly (18).
Illustration 62 g01723733
Connect block (17) and hose assembly (16).
Illustration 63 g01726799
Remove clamps (14). Position hose assembly (15) and reinstall clamps (14).
Illustration 64 g01723693
Install clamps (13). Connect hose assembly (12).
Illustration 65 g01725255
Connect hose assembly (11) and hose assembly (10).
Illustration 66 g01723695
Connect hose assembly (9), hose assembly (8), and hose assembly (7).
Illustration 67 g01723343
Connect hose assembly (6), hose assembly (5), and hose assemblies (4).
Illustration 68 g01723313
Use a suitable lifting device to support drive shaft (2). Use a suitable prybar to connect drive shaft (2). Install new bolts (3). Tighten new bolts (3) to a torque of 550 20 N m (406 15 lb ft).
Illustration 69 g01723294
Install guard assembly (1).
Turn the fuel supply to the ON position.
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hoist, Torque Converter and Brake Tank Oil - Change".
Illustration 70 g01728694
Remove Tooling (A).
Charge the air pressure in the air reservoir. Refer to Operation and Maintenance Manual, "Starting with an External Air Supply" to refill the air tanks.End By:
Install the pump drive shaft. Refer to Disassembly and Assembly, "Pump Drive Shaft (Hydraulic) - Remove and Install".
Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Install the radiator. Refer to Disassembly and Assembly, "Radiator - Remove".