BRACKET AS 1106360 - Caterpillar

Illustration 1 g00437351
An improper hydraulic oil level can result in machine damage.
(1) Torque for two plugs ... 29 5 N m (21 4 lb ft) (2) 096-6825 Spring Free Length ... 59.0 mm (2.32 inch) Outside Diameter ... 18.5 mm (.73 inch) (3) Torque for two plugs ... 29 5 N m (21 4 lb ft) (4) Torque for six bolts ... 58 10 N m (43 7 lb ft) (5) 133-6926 Spring Free Length ... 24.7 mm (.97 inch) Outside Diameter ... 15.5 mm (.61 inch)Follow the next three steps for the preload adjustment of bearing (6) :
Attach a rope around hub (7) and spring assembly (22) in order to measure the torque of hub (7) .
When the torque measurement is over 88 N m (65 lb ft) it may be necessary to increase dimension (A) of flange (21). Machine surface (B) of flange. A 0.05 mm (0.002 inch) cut of the shoulder decreases the torque by 20 N m (15 lb ft).
When the measured torque is below 20 N m (15 lb ft) replace the bearing (6), flange (21), and spindle (17). Replace these components before any adjustment is made.Follow the next three steps for the adjustment of bearing (9) end play:If hub (7), spindle (17), bearing (9), needle bearing (8), shaft (11), and spacer (12) are replaced, adjust the end play of bearing (9). When snap ring (10) is replaced, select a snap ring of the same thickness or a snap ring close to the desired thickness.
Install the snap ring into the snap ring groove of flange (21) .
Measure the clearance between snap ring (10) and bearing using a thickness gauge.
Clearance should be 0 to 0.05 mm (0.002 inch). (13) Torque for two plugs ... 350 39 N m (260 29 lb ft) (14) Torque for four bolts ... 29 5 N m (21 4 lb ft) (15) Two 096-6824 Spring Free Length ... 27.5 mm (1.08 inch) Outside Diameter ... 18.2 mm (.72 inch) (16) Eight 133-6921 Spring Free Length ... 32.2 mm (1.27 inch) Outside Diameter ... 13.4 mm (.53 inch) (18) 150-5732 Spring Free Length ... 45.7 mm (1.80 inch) Outside Diameter ... 40.5 mm (1.59 inch) (19) 107-6530 Spring Free Length ... 16.7 mm (.66 inch) Outside Diameter ... 11.9 mm (.47 inch) (20) Torque for three bolts ... 412 63.7 N m (300 47 lb ft) (20) Apply 9S-3263 Thread Lock Compound to the three bolt threads. (20) Apply 5P-3931 Anti-Seize Compound to the reamer head of the bolts. (23) Torque for three plugs ... 12 2 N m (9 1 lb ft)