BRACKET 1234587 - Caterpillar

Machine Control & Guidance Products: CAES ULTRA (S/N: 2TZ1-UP)Landfill Compactor: AllMotor Grader: AllWheel Dozer: AllWheel Loader: AllIntroduction
This Special Instruction provides information for the installation of the 285-6661 CAESultra Electronic Kit and the Radio Kit.The procedures describe the installation process for the Computer Aided Earthmoving System on Wheel Loaders, Wheel Dozers, Landfill Compactors, and Motor Graders. The installation will require welding, cutting holes, using electrical tools, and using mechanical tools. After a technician has completed the first installation process, future installations should require 6 to 8 hours for completion.The installation process can be separated into the following procedures:
GPS Receiver, GPS Receiver Harness, and Chassis Harness Installation
Machine Radio Installation
Rear Harness Assembly Installation
Operator Display Installation
Front Harness Assembly Installation
Battery Backup Installation
Power Harness and Fuse Installation
Initial Power Checks
Machine ID Worksheet Entries
Dimension Measurements and Measure UpOperation and Maintenance Manual
Locate the Operation and Maintenance Manual, SMBU8513, "Muti-lanuage CD". Print the Operation and Maintenance Manual of the desired language and secure the manual in the cab of the machine.The operation of CAESultra is covered in the Operation and Maintenance Manual, SEBU8513, "CAESultra". Refer to this manual for more information.Important Safety Information
Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools to perform these functions properly. Safety precautions and warnings are provided in this instruction and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. Therefore, the warnings in this publication and the warnings that are on the product are not all inclusive. When a tool, procedure, work method, or operating technique that Caterpillar does not recommend is used, ensure that you and others are safe during use. Additionally, ensure that the product will not be damaged or made unsafe by the operation, lubrication, maintenance, or repair procedures that are used.
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Cat dealer for replacement manuals. Proper care is your responsibility.
Electrocution Hazard! Keep the machine and attachments a safe distance from electrical power. Stay clear 3 m (10 ft) plus twice the line insulator length. Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions and warnings will cause serious injury or death
Machine swings. Stay back. Crushing hazard could cause serious injury or death.
Accidental engine starting can cause injury or death to personnel working on the equipment.To avoid accidental engine starting, disconnect the battery cable from the negative (−) battery terminal. Completely tape all metal surfaces of