BRACKET 1400075 - Caterpillar

Machine Preparation
Park the machine on a smooth, horizontal surface. Park the machine away from working machines and personnel. Lower the work tool to the ground.
Allow only one operator on the machine. Keep all personnel away from the machine or in the view of the operator.
Move the transmission control lever to the NEUTRAL position.
Engage the parking brake.
Place the steering frame lock in the LOCKED position.ReferenceFor more information about preparing the machine for troubleshooting, refer to the Service Manual module Testing and adjusting, "Machine Preparation for Troubleshooting" for the machine that is being serviced.Performance Test
Check the pressure of the main relief valve. The pressure should be 24000 350 kPa (3500 50 psi).ReferenceFor additional information about testing the main relief valve, refer to the Systems Operation and Testing and Adjusting, "Relief Valve (Main) - Test and Adjust".Implement Stall Test
Turn the engine start switch to the OFF position.
Engage the parking brake.
Start the engine. Run the engine at high idle.
Place the tilt control lever to the full TILT BACK position.
Record the engine rpm. The engine rpm should be 2320 50 rpm.
Turn the engine start switch to the OFF position.