BRACKET 1400504 - Caterpillar

1. Disconnect the batteries. Disconnect electric wires from terminal stud (1). Disconnect electric wires from terminal stud (2).2. Fasten a nylon strap and hoist to the starting motor. Remove three bolts (3). Remove the starting motor. The weight of the starting motor is 29 Kg (64.5 lb.). The following steps are for the installation of the electric starting motor.3. Fasten a nylon strap and hoist to the starting motor. Put the starting motor in position on the flywheel housing. Install bolts (3) that hold it to the flywheel housing.4. Connect electric wires to terminal stud (2) and electric wires to terminal stud (1). Connect the batteries.