BRACKET AS 1426921 - Caterpillar

Illustration 1 g03322395
Typical example
Table 1
Specification for 257-2220 Bucket Linkage Gp and 257-2224 Bucket Linkage Gp
Item Qty Part Specification Description
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all the pin bores and the bushings before assembly. After you assemble the bushings coat all the bores and the bushings with 5P-0960 Grease Cartridge.
1 3 8T-4780 Bolt Torque to 325 40 N m (240 30 lb ft).
2 1 198-0868 Pin As Diameter is 49.950 0.025 mm (1.9665 0.0010 inch).
3 2 9R-7273 Spacer As required, use the spacers in order to adjust the lateral clearance to a maximum of 0.8 mm (0.03 inch):
Thickness is 1.0 mm (0.04 inch).
4 2 246-3033 Pin As Diameter is 59.950 0.025 mm (2.3602 0.0010 inch).
5 2 113-4982 Bushing Bore before installation is 70.23 0.02 mm (2.765 0.001 inch).
Installation depth is 7.5 0.5 mm (0.30 0.02 inch).
6 2 093-1434 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the lip type seals so that the lip faces outside in order to prevent passage of lubricant.
7 1 111-7609 Bushing Bore before installation is 60.18 0.02 mm (2.369 0.001 inch).
Installation depth is 7.5 0.5 mm (0.30 0.02 inch).
8 2 099-7091 Shim As required, use the shims in order to adjust the lateral clearance to a maximum of 0.8 mm (0.03 inch):
Thickness is 1.5 mm (0.06 inch).
9 2 093-0065 Shim As required, use the shims in order to adjust the lateral clearance to a maximum of 0.8 mm (0.03 inch):
Thickness is 1.0 mm (0.04 inch).
10 2 093-1433 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed.