BRACKET 1466384 - Caterpillar

Illustration 1 g03679376
Front view
Table 1
Specification for 385-9282 Transfer Gears and Case Gp
Item Qty Part Specification Description
1 1 5F-3144 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
2 1 5F-3999 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
Illustration 2 g03679382
Section A-A
Table 2
Item Qty Part Specification Description
3 2 133-4296 Lip Type Seal Lubricate the seal run surface lightly with the lubricant that is being sealed.
Install lip seal flush with the face of the bearing cage.
4 1 353-0314 Bearing As Align idler bearing cone spacer holes with shaft holes.
5 2 172-6103 Yoke As Yokes must be installed in phase as shown.
6 2 1A-3103 Bolt Torque to 475 50 N m (350 37 lb ft).
7 2 6V-5656 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
8 1 7X-1548 Seal Lubricate the bore lightly with the lubricant that is being sealed.
9 - - Before assembly, apply white Loctite Breakloose PST to the surfaces.
10 1 138-1509 Ecology Drain Gp Torque to 100 10 N m (74 7 lb ft).