BRACKET 1519751 - Caterpillar

TARGET="_parent">Conveyor Planetary Drive (Drag) Oil - Change
Conveyor Planetary Drive (Drag) Oil Sample - Obtain
Final Drive Planetary Oil - Change
Final Drive Planetary Oil Sample - Obtain
Tow Arm Joint Nuts - Tighten
Wheel Nuts (Final Drive) - Tighten
Every 50 Service Hours or Weekly
Hopper Cylinder Bearings - Lubricate
Track Roller Frame - Lubricate
Every 250 Service Hours
Belts - Inspect/Adjust/Replace
Conveyor Drive Chains (Auger) - Adjust
Conveyor Planetary Drive (Auger) Oil Level - Check
Conveyor Planetary Drive (Drag) Oil Level - Check
Cooling Cores - Clean
Drag Conveyors - Adjust
Engine Oil Sample - Obtain
Final Drive Planetary Oil Level - Check
Idler Bearings (Takeup) - Lubricate
Tracks - Inspect
Track Tension - Check
Conveyor Drive Chains (Drag) - Adjust
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Conveyor Planetary Drive (Auger) Oil - Change
Conveyor Planetary Drive (Auger) Oil Sample - Obtain
Conveyor Planetary Drive (Drag) Oil - Change
Conveyor Planetary Drive (Drag) Oil Sample - Obtain
Conveyor System - Inspect
Final Drive Planetary Oil - Change
Final Drive Planetary Oil Sample - Obtain
Fuel System Filter (In-Line) - Replace
Fuel System Primary Filter - Clean/Inspect/Replace
Fuel System Secondary Filter - Replace
Fuel Tank Strainer - Clean
Hydraulic System Oil Sample - Obtain
Engine Oil and Filter - Change
Every 500 Service Hours or 3 Months
Cooling System Coolant Sample (Level 1) - Obtain
Every 500 Service Hours or 6 Months
Braking System - Test
Every 1000 Service Hours
Auger Slide - Adjust
Auger Slide - Lubricate
Hydraulic System Oil Filters - Replace
Pump Drive Oil - Change
Pump Drive Oil Filter - Replace
Pump Drive Oil Sample - Obtain
Track Roller Bearings - Inspect
Track Takeup Linkage - Lubricate
Every 1000 Service Hours or 1 Year
Engine Valve Lash - Check
Every 2000 Service Hours
Alternator - Inspect
Engine Mounts - Inspect
Fuel Tank Cap Filter - Replace
Pump Drive Breather - Replace
Track Roller Bearings - Lubricate
Every 3000 Service Hours
Cooling System Water Temperature Regulator - Replace
Every 3000 Service Hours or 2 Years
Hydraulic System Oil and Filters - Change
Starting Motor - Inspect
Every 3 Years
Seat Belt - Replace
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change