BRACKET AS 1805141 - Caterpillar

Industry Canada Notice to Users
This device complies with Industry Canada license exempt RSSs. Operation is subject to the following two conditions:
This device may not cause interference
This device must accept any interference, including interference that may cause undesired operation of the device.Radio Frequency Range
This equipment is equipped with a Cat® Product Link communication device. When electric detonators are being used for blasting operations, radio frequency devices can cause interference with electric detonators for blasting operations which can result in serious injury or death. The Product Link communication device should be deactivated within the distance mandated under all applicable national or local regulatory requirements. In the absence of any regulatory requirements Caterpillar recommends the end user perform their own risk assessment to determine safe operating distance.
The following Cat Product Link communication device specifications are provided to aid in conducting any related hazard assessment and to ensure compliance with all local regulations:
Table 1
Radio Transmitter Specifications
Radio Model (Maximum) Transmitter Frequency Range Transmitter Power
PL631 1616 MHz - 1626.5 MHz 5.1W max Note: The PL631 operates at a different frequency range in Russia.
Table 2
Radio Transmitter Specifications — Russia Specific
Radio Model and Part Numbers Transmitter Frequency Range Transmitter Power Average
PL631 467-4162, 463-1177, 455-5564, 442-7199 1621.35 MHz - 1626.5 MHz 2.16 dBW Declaration of Conformity - European Union
Table 3
CATERPILLAR®
EU Declaration of Conformity
This Declaration of Conformity is issued under the sole responsibility of the manufacturer.
The undersigned, representing the manufacturer:
CATERPILLAR, Inc.
100 N.E. Adams Street
Peoria, IL 61629
USA
hereby declares that the product, object of this description:
Product Link, PL631, Cellular Radio Telematics Device
Brand: Caterpillar Model: PL631
Part #: 442-7199
Antenna Part #: 443-8463, 443-8462
Is in conformity with the relevant Union harmonization legislation:
Directive 2014/53/EU
Directive 2011/65/EU
Conformity is shown by compliance with the applicable requirements of the following documents:
Conformity Assessment Procedure: ______ Annex II, ___X___ Annex III, _______Annex IV
2014/53/EU: LVD (Sec 3.1a): EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 62311:2008
EMC (Sec 3.1b): EN 301 489-1 V2.2.0
EN 301 489-19 V2.1.0
EN 301 489-20 V2.1.0
RF (Sec 3.2) EN 301 441 V2.1.1
EN 303 413 V1.1.1
2011/65/EU: RoHS EN 50581:2012
Notified Body Name: TUV SUD BABT
Notified Body Number: 0168
Examination Certificate # : BABT-RED000351 i02
Illustration 1 g06341146