BRACKET AS 1882434 - Caterpillar

Comfort Level Seat (If Equipped)
Illustration 1 g06225151
(1) Headrest
(2) Backrest adjuster
(3) Seat and console fore and aft adjuster
(4) Indicator
(5) Seat height adjustment lever
(6) Seat fore and aft leverThe operator can adjust the height of headrest (1). To adjust the headrest, hold the headrest with both hands. Move the headrest up and down. Release the headrest when the desired position is attained. The headrest will remain in the desired position.Pull up on backrest adjuster (2) to release the lock. Move the backrest to the desired position and then release the adjuster.Lift up on fore and aft adjuster (3) to release the seat from the locked position. Adjust the seat and console forward or rearward to the desired position and then release the lever to lock the seat.Use seat height adjustment lever (5) to adjust the seat for the operator's height and weight. Move the adjuster switch to the "+" symbol to raise the height. Ratchet the seat upward without sitting in the seat. Then sit in the seat to check the color of indicator (4). When the indicator is showing green, the seat is in the right range for the operator. Further adjustment can be made as long as the indicator stays green.To lower the seat, move the adjust switch to the "-" symbol. Ratchet the adjuster downward without sitting in the seat. Then sit in the seat to check the color of indicator (4). When the indicator is showing green, the seat is in the right range for the operator. Further adjustment can be made as long as the indicator stays green.Pull upward on seat fore and aft lever (6) to release the cushion lock. Adjust the seat cushion forward or backward to the desired position and then release the lock to lock the cushion in place.Deluxe Level Seat (If Equipped)
Illustration 2 g06251700
(1) Adjustment lever for the lumbar support
(2) Seat heater switch
(3) Adjustment lever for reclining the seat
(4) Fore/Aft isolator activate/deactivate lever
(5) Indicator
(6) Seat and console fore and aft lever
(7) Seat height adjustment
(8) Seat cushion angle adjuster
(9) Console height adjustment
(10) Seat fore and aft adjuster
(11) Seat cushion fore and aft adjuster
(12) HeadrestThe lumbar support is located in the back of the seat. Turn knob (1) (if equipped) counterclockwise to increase the force of the lumbar support. To decrease the lumbar support, continue to turn the knob counterclockwise.
Illustration 3 g06251600
(A) Low heat
(B) High heatSeat heater switch (2) is a three position switch. The middle position of the switch is off. Press the top position of the switch for low heat. Press the bottom of the switch for high heat.
Heat-induced burns can occur when some people use a seat heater. Do not use the seat heater if you have a reduced ability to sense temperature changes, a reduced ability to feel pain, or have sensitive skin.
Pull up lever (3) to change the angle of the backrest. With the backrest in the desired position. Release the lever.Push in adjuster (11) to adjust the fore/aft position of the seat cushion.Pull lever (6) to adjust the seat