BRACKET 1962376 - Caterpillar

Use 155-1214 Tube (15), two 7S-5833 Hoses (11), and four 9X-2201 Hose Clamps (13) to connect the elbow at the right side of the radiator to the regulator housing on the engine.Install the Components from 171-4614 Water Lines
Table 23
Required Components from 171-4614 Water Lines    
Item    Quantity    Part Number    Description    
1     1     142-2333     Hose    
2     2     8T-4986     Hose Clamp    
Illustration 95 g00695391
Use 142-2333 Hose (1) and two 8T-4986 Hose Clamps (2) to connect the 184-4255 Tube As to the elbow assembly at the left side of the radiator.Install the Components from 163-2633 Platform Gp
Table 24
Required Components from 163-2633 Platform Gp    
Item    Quantity    Part Number    Description    
1     4     8T-8917     Bolt    
2     4     7D-1649     Hard Washer    
3     1     160-9853     Platform    
Illustration 96 g00695438
Use four 8T-8917 Bolts (1) and four 7D-1649 Hard Washers (2) to install 160-9853 Platform (3) .Install the Components of 171-4615 Water Lines
Table 25
Required Components from 171-4615 Water Lines    
Item    Quantity    Part Number    Description    
1     8     8T-4194     Bolt    
2     8     4B-4280     Washer    
3     2     1P-3705     Rectangular Seal    
Illustration 97 g00911746
After you install the expansion tank, use four 8T-4194 Bolts (1), four 4B-4280 Washers (2), and 1P-3705 Rectangular Seal (3) to install 190-3728 Tube (A) on the right side at the bottom of the expansion tank. Tighten two 8T-6703 Hose Clamps (not shown) on 126-9036 Hose (not shown) that connects 190-3728 Tube (not shown) and the coolant bypass line.
Illustration 98 g00911747
Use four 8T-4194 Bolts (1), four 4B-4280 Washers (2), and 1P-3705 Rectangular Seal (3) to install 156-6276 Tube (B) on the left side at the bottom of the expansion tank. Tighten two 8T-6703 Hose Clamps (C) on 127-0796 Hose (D) that connects 156-6276 Tube (B) and the 156-6249 Tube (not shown).