BRACKET AS- 1U8763 - Caterpillar

Speed of the work tool is fast during a single operation
The following adjustments can be performed.
Spool shift pressure for the attachment control valve may need adjustment for a single operation.
The value of this parameter may be too high. Decrease the value of the following parameters until the desired work tool speed is met."Atch #X Max Ext Press" - XXXX [kPa]"Atch #X Max Ret Press" - XXXX [kPa]Note: For reference, this parameter is set within the range of 800 kPa to 2000 kPa.Speed of the work tool is fast during a multiple operation
The following adjustments can be performed when the speed of the work tool is fast while operated along with a boom, stick, bucket, swing, or travel function.
Spool shift pressure for the attachment control valve may need adjustment for a multiple operation.
The value of this parameter may be too high. Decrease the value of the following parameters until the desired work tool speed is met."Atch #X M-Ope Max Ext Press" - XXXX [kPa]"Atch #X M-Ope Max Ret Press" - XXXX [kPa]Note: For reference, this parameter is set within the range of 800 kPa to 2000 kPa.Speed of the work tool is slow during a single operation
The following adjustments can be performed.
Pump flow to the work tool may need adjustment.
The appropriate flow setting for the work tool may be too