BRACKET AS 1W0535 - Caterpillar

Illustration 1 g03806574
Rear view
Table 1
Specification for 229-5779 Axle    
Item     Qty     Part     Specification Description    
1     1     055-1990 Vent     Torque to
3.25 to 5.25 N m (28.76 to 46.47 lb in).    
2     9     8T-4199 Bolt     Apply Loctite 542 to threads.
Torque to
17.1 to 18.9 N m (151.3 to 167.3 lb in).    
3     10     6V-8336 Bolt     Apply Loctite 270 to threads.
Torque to
102 to 126 N m (75 to 93 lb ft).    
4     3     211-2187 Plug     Torque to
51 to 63 N m (38 to 46 lb ft).    
5     12     211-2714 Bolt     Apply Loctite 270 to threads.
Torque to
177.65 to 196.35 N m (131.03 to 144.82 lb ft).    
6     Total thickness of ten new plates, two new end plates, and eight new plates is
33.4 mm (1.31 inch):    
10 208-7907 Plate     Thickness is
1.5 mm (0.06 inch).    
8 208-7906 Plate     Thickness is
1.6 mm (0.06 inch).
Maximum wear per each disk is
0.15 mm (0.006 inch).    
2 208-7905 End Plate     Thickness is
2.8 mm (0.11 inch).
Maximum wear per each disk is
0.10 mm (0.004 inch).    
7     1     312-0339 Bevel and Transfer Gear     Set backlash to
0.15 to 0.25 mm (0.006 to 0.010 inch).    
8     2     152-6145 Magnetic Plug     Torque to
51 to 63 N m (38 to 46 lb ft).    
9     32     6V-5844 Bolt     Torque to
258.4 to 319.2 N m (190.6 to 235.4 lb ft).    
10     8     101-7404 Bolt     Torque to
59.5 to 73.5 N m (43.9 to 54.2 lb ft).    
11     1     208-7914 Ring Nut     Torque to
280.5 to 346.5 N m (206.9 to 255.6 lb ft).