BRACKET AS. 2005281 - Caterpillar

1. Remove floormat (1) from the cab. 2. Remove bolts (3) that hold the floor plate. Remove floor plate (2). 3. Remove the spring (not shown) from linkage rod (6) and the bottom of the floor plate.4. Remove cotter pin, pin and link (not shown) from the bottom of the pedal assembly. Disconnect linkage rod (6) from the pedal assembly.5. Remove bolts (7) that hold the brackets to the floor plate. Remove governor pedal assembly (4).6. Remove brackets (5) from each side of the pedal assembly. Remove the pin. 7. Use tooling (A) to remove bushing (8) from the pedal assembly.Install Governor Control Pedal
1. Use tooling (A) to install the bushing in the pedal assembly. Install the bushing until it is even with the surface of the pedal assembly. 2. Install pin (2) in the pedal assembly.3. Put brackets (1) in position on the pin. 4. Put pedal assembly (3) in position on the floor plate. Install the bolts that hold the brackets to the floor plate.5. Put linkage rod (4) in position on the pedal assembly. Install link, pin and cotter pin. Install the spring on the linkage rod and the bottom of the floor plate. 6. Install floor plate (5) and floor mat in the cab.