BRACKET AS 2100767 - Caterpillar

Illustration 1 g00490356Expected Result:The payload weights for a given truck seem correct after performing the calibration of the payload system.Results:
YES - The payload weights for a given truck seem correct after performing the calibration of the payload system. The condition that was responsible for the incorrect payload measurement has been eliminated. Return the truck to service.Repair: The condition that was responsible for the incorrect payload measurement has been eliminated. Return the truck to service.STOP
NO - The payload weights for a given truck remain incorrect after performing the calibration of the payload system. Proceed to test step 5.Test Step 5. CHECK FOR THE CORRECT PLACEMENT OF THE LOADObserve the loading operation. Ensure that the operator of “loading tool” is placing the load in the “truck body” in the proper area.
Illustration 2 g00670357
The 175-2624 Position Load Markers are available via MSO through the machine order system. For information on proper placement of the marker on the body, contact Decatur CMT Product Support. Product Support will need the information that is listed here: the serial number of the truck, the part number of the truck body, the sequence number of the truck body and information on modifications that have been made to the body.
(1) Center of Load Marker Expected Result:The operator is loading the truck correctly. Refer to Illustration 2.Results:
YES - The operator of the loading tool is positioning the load correctly. Proceed to test step 6.
NO - The operator of the loading tool is not positioning the load correctly in the body.Repair: In order to ensure that the load will be placed properly, provide the operator of the loading tool with training.STOPTest Step 6. CHECK FOR ANY SERVICE WORK THAT MAY AFFECT THE MEASUREMENT OF THE PAYLOADCheck the maintenance records of the truck for any work that may affect the VIMS components. This includes the following:
Replacement of the body raise switch
Work on the truck body
Work on any other component of the payload system Expected Result:No work that is related to the payload system was performed on the machine.Results:
YES - No work that is related to the payload system was performed on the machine. Proceed to test step 7.
NO - Work was performed on the truck that is related to the payload system. When the payload system has not not been calibrated after replacing components, proceed to Test Step 8. Service work may have an effect on the payload measurement.Test Step 7. CHECK FOR DIAGNOSTIC EVENTSVerify that no “active diagnostic events” or “intermittent diagnostic events” are present for the suspension cylinder pressure sensors or other components of the payload system.Expected Result:No active